Problem Document
|
Former IBIS ID
|
Synopsis
|
Last Modified Date
|
1322741.1 |
|
SL8500 - Part Number for Ethernet Switch Assembly |
2011-05-17
|
1322375.1 |
|
SL8500 - SSD (Service Safety Door) Gear Missing |
2011-05-16
|
1322373.1 |
|
SL3000/SL8500 - Policy Routes Disabled after reboot of 2.8x SL3000 or 6.0x SL8500 Codes |
2011-05-16
|
1321677.1 |
|
SL8500 - H-Bot Movement in RIM Corner May Make Clicking Noise |
2011-05-16
|
1319438.1 |
|
SL8500 - Rail Communication Problems May Cause Multiple Robot Failures on the Same Rail |
2011-05-05
|
1319418.1 |
|
SL8500 - CAP Auto mode SLS2259A problem |
2011-05-05
|
1319397.1 |
|
SL8500 - Elevator Tube is Damaged Due to Failed Roller |
2011-05-05
|
1308248.1 |
|
ACSLS - SL8500 Dual-TCP Port 2a Cannot be Varied Online |
2011-03-31
|
1304145.1 |
|
SL8500 - Standby HBC Send the Host "LSM Not Ready" Messages When the Service Safety Door is Activated and Then the Access Door is Opened |
2011-03-21
|
1302074.1 |
|
ACSLS - SL8500 RE 6.0 - When operating SSD and main access door is opened, all LSM's in ACSLS go offline |
2011-03-15
|
1298506.1 |
|
SL8500 - LSMs Go Offline With SSD in Redundant Electronics Configuration Under ACSLS |
2011-02-28
|
1298501.1 |
|
SL8500 - Ghost Robots Being Seen After Re-configuring Library for Less Robots |
2011-02-24
|
1293137.1 |
|
SL8500 - IP Switch Failure.. How to Diagnose |
2011-02-14
|
1271235.1 |
|
SL8500 - 3407 Manifest Problem Read Failure java.io.FileNotFoundException |
2010-12-09
|
1268577.1 |
|
LTO - LTO tape drive IPL issue with SL-Series tape library |
2010-11-23
|
1240254.1 |
|
SL8500 - Pass Thru Ports Reporting in SL Console Have Been Swapped Using 6.02 Firmware |
2011-02-17
|
1222086.1 |
|
T10000 - Drive Wearout Critera - Tape Alert 24 |
2010-10-07
|
1140893.1 |
|
ACSLS - CAP is already reserved in partition 999 by host 99 |
2010-10-01
|
1098659.1 |
|
SL8500 - PTP Initialization Errors After Upgrading Code to 4.73 |
2010-06-24
|
1020981.1 |
268468 |
Tape - CommVault Does Not See STK Libraries in Windows 2003 in the Device Manager When Attached to an Emulex 8gig HBA |
2011-05-09
|
1020745.1 |
264028 |
SL8500 - Problem With Initialization of New Installed Service Safety Door (SSD) |
2011-05-09
|
1020080.1 |
251826 |
SL8500 - CAP not available to customer production due to CAP ?Mode? found in ?Null? status and the ?Reserver? field shows ?Default? on SLConsole |
2010-12-23
|
1019845.1 |
247446 |
SL8500 - Resetting Admin Password using SL Console |
2010-12-29
|
1019746.1 |
245048 |
T10000 - Dismount Errors for T10KB Cleaning Media in SL3000 and SL8500 |
2011-01-13
|
1019304.1 |
238346 |
SL8500 - SL Console Reporting CAP Not Installed |
2011-03-15
|
1019051.1 |
233801 |
SL8500 - Pass Thru Port Initialization Failures |
2010-05-17
|
1018232.1 |
229620 |
SL8500 - CAP locks up, Eject process aborted, Veritas Error 251 and 293 |
2011-02-04
|
1017376.1 |
228451 |
SL8500 - Problem Reading Volser Labels due to Marginal Labels and Read Verify Flag |
2011-03-16
|
1017225.1 |
228123 |
SL8500 - CAP Will Not Come Online |
2011-02-04
|
1016896.1 |
227280 |
SL8500 - Tray Cable Causing T10000 Link Errors |
2011-03-03
|
1016864.1 |
227193 |
SL8500 - SLS2266E when trying to enter cartridges through the CAP |
2010-02-17
|
1016299.1 |
225749 |
DLT S4 - Getting Stuck Cartridge in SL8500 Due to Missing Leader |
2010-12-30
|
1016199.1 |
225501 |
SL8500 - Failed Target Calibration - Result Code 5416 |
2011-03-15
|
1016189.1 |
225485 |
Sun[TM]/STK Libraries - Not Able to Read Non-Supported Barcode/Voser Labels - Specifications on Supported Labels |
2010-12-22
|
1015827.1 |
224628 |
SL8500 - Hand Bots Making Noise at CAP |
2011-03-03
|
1015813.1 |
224607 |
Message SLS0662I LMU Response Error - xx,xxx,28,13 and SLS0660I ERR BCST |
2010-10-01
|
1015764.1 |
224466 |
SL8500 - Reserve Status in PTP Configurations |
2011-02-03
|
1015720.1 |
224346 |
SL8500/ SL500 - SL Console on Solaris Hangs With a Grey Block in the Display During Install |
2011-02-07
|
1015089.1 |
222825 |
SL8500 - CAP Will Not Work in Automatic Mode with HSC |
2011-02-09
|
1015066.1 |
222787 |
SL8500 - H-Bot Code Does Not Upgrade on Replacement H-bot |
2011-02-09
|
1014755.1 |
221996 |
SL8500 - Initialized To An Incorrect Length |
2011-05-25
|
1014719.1 |
221905 |
SL8500 - Drive Tray Power Tool Problem with SCSI/Fibre Toolbox and LTO Drives |
2011-03-15
|
1014577.1 |
221538 |
SL8500 - Door Alignment Problem Due to Manufacturing Issue |
2011-03-15
|
1014563.1 |
221514 |
SL8500 - Error from device Code: 501 - Robot Can Not Move on Rail |
2011-02-02
|
1014462.1 |
221294 |
SL8500- Foam bumpers have been added to the RIM to provide protection. |
2011-03-15
|
1014452.1 |
221261 |
SL8500 - Host IP Address Conflict |
2011-02-02
|
1014181.1 |
220535 |
SL8500 - Phantom HandBots Noted In SL Console In 4-Handbot Library |
2010-12-27
|
1014101.1 |
220385 |
SL8500 - Sbot Initialization Failure Due to Rail Terminator Problem |
2011-03-16
|
1013668.1 |
219289 |
SL8500 - HBT Drive Communication Errors |
2011-05-25
|
1013663.1 |
219282 |
SL8500 - PTP Cable Mis-Routing Causing PTP Initialization Failure |
2011-03-03
|
1013593.1 |
219142 |
SL8500 - False "Door Open" Problem - Library Components Rebooting |
2011-02-08
|
1013497.1 |
218932 |
SL8500 - Touch Panel Screen is Blank / White |
2011-02-02
|
1013454.1 |
218843 |
SL8500 - HBot Inoperative Due to HBB Card failure - FB102113 Fixes ESD Problem with 9840 |
2011-01-06
|
1013441.1 |
218809 |
SL8500 - CAP Locking Intermittent Error with Result Code 7009 |
2011-03-15
|
1013433.1 |
218800 |
SL8500 - Unable to communicate on the Network when its IP address is modified or a new address is assigned. |
2010-02-16
|
1013256.1 |
218380 |
SL8500 - Popping Noise Occurs While Robot Moving Around Library |
2011-03-15
|
1013255.1 |
218379 |
SL8500 - CAP does not rotate freely during Installation. |
2010-01-28
|
1007010.1 |
209685 |
SL8500 - Defective EPO Switch Cable Assembly |
2011-02-03
|
1005619.1 |
207801 |
SL8500 - Problems Upgrading SL8500 Code Direct Attached |
2011-03-18
|