| FAB
|
Implementation
|
Synopsis
|
Last Modified Date
|
| A0210-1 |
U
|
400MHz and 464/466MHz UltraSPARC II Modules in Enterprise Server platforms may experience system reboots or system panics. |
Sep 08 2003
|
| A0184-1 |
C
|
SCI cards installed in E10000 systems may not initialize properly. |
Nov 26 2001
|
| A0176-2 |
C
|
E10K power cords with pre-tinned wires violates UL 1950 standard. |
Dec 21 2002
|
| A0163-1 |
C
|
Systems with large quantities of UDWIS/SBus Host Adapters installed may not come up after reboot due to miscommunication between the SCSI host and the target. |
Mar 31 2000
|
| A0161-1 |
C
|
Enterprise 10000 systems with (SunSwift) Cards could experience intermittent but fatal errors at power up. |
Mar 21 2000
|
| A0155-1 |
M
|
Installation of certain SBus cards in slot 1 of E10000 having older I/O Mezzanine Boards has been found to cause unpredictable behavior, including undetected data corruption. |
Jan 12 2000
|
| A0138-1 |
C
|
SBus/FC SOC+ Host Adapters may experience recoverable data transfer read errors. |
May 14 1999
|
| A0127-1 |
M
|
Quad-FastEthernet SBus X1049A cards now available for E10000 systems shipped with the Quad-Ethernet SBus X1058A cards. |
Mar 20 1998
|
| A0125-1 |
M
|
A.C. Power Cord inside E10000 can become damaged by system leveling foot. |
Mar 18 1998
|
| A0124-1 |
U
|
Early life failures on the E10000 System Board could cause system to crash. |
May 19 1998
|
| A0117-1 |
C
|
Slow E10000 SSP to control board connection resulting in various system errors. |
Mar 11 1998
|
| A0103-1 |
M
|
E10000 Hang created by control board going into a continuous reset mode. |
Sep 19 1997
|
| A0096-1 |
M
|
Enterprise 56" Rack non-compliance with safety standard UL1950/EN60950 |
Mar 07 1997
|
| I0849-1 |
R
|
New capability is available on E10000 systems to identify MSRAM modules from POST output. |
2002-10-24
|
| I0838-1 |
R
|
E10K cannot boot from the network using Dual Fast Ethernet + Dual SCSI PCI Adapter |
2002-06-12
|
| I0827-1 |
R
|
SSP 3.4 and 3.5 'showfailover' output may be inconsistent with the actual E10K clock source and may lead to domain arbstops when an active control board is hot-swapped |
2002-05-15
|
| I0812-1 |
R
|
Installation of Solaris 8 (U7) from DVD on F15K and E10000 servers fails to execute platform specific finish scripts |
2002-04-17
|
| I0712-1 |
R
|
Finisar GBIC problems on the storage array products |
2001-08-29
|
| I0707-1 |
R
|
Booting from Network problem with Solaris 2.5.1 & 2.6 with 464MHz or faster CPU |
2001-08-16
|
| I0689-1 |
R
|
To torque correctly on a specific Sun Products, refer to the Torque tool matrix for correct Torque Bit Type/Size and Torque Setting |
2002-09-26
|
| I0678-1 |
R
|
SBus bracket kit may be needed to install SBus card on E10K |
2001-06-01
|
| I0675-1 |
R
|
The current E10000 System Board insertion technique places improper loads on the System Board/Centerplane mating connector and may damage the connector. |
2001-10-02
|
| I0640-1 |
R
|
DTAG Error Guideline on E10K |
2001-04-19
|
| I0624-1 |
R
|
E10000 Capacity On Demand systems are not configured to enable automatic data collection. |
2000-10-25
|
| I0614-1 |
R
|
New guidelines have been introduced for air filter maintenance on E10000 systems. |
2000-09-19
|
| I0611-1 |
R
|
Some E10K systems are being shipped to customers with all unipack boot disks for each domain plugged into the same AC power |
2000-09-29
|
| I0582-1 |
R
|
Sun Enterprise 10000 Server domain install instructions are incorrect in Solaris 8. |
2000-05-30
|
| I0579-1 |
C
|
Systems with Ultra DWIS/SBus Host Adapter slow to a halt under heavy IO loads and the Console displays "SCSI transport failed" error messages. |
2000-06-08
|
| I0578-1 |
R
|
The Sun Enterprise Alternate Pathing (AP) 2.3 AnswerBook package is missing from the AP 2.3 release. |
2000-05-11
|
| I0570-3 |
R
|
Provide instructions and guidelines to CORRECTLY identify Ecache panic fault diagnosis. |
2000-07-07
|
| I0560-1 |
R
|
Webpage created detailing known problems with Dynamic |
2000-02-11
|
| I0547-1 |
C
|
Intermittently, SCSI devices connected to a UDWIS card may |
2000-01-21
|
| I0539-1 |
R
|
Enterprise Server Alternate Pathing software is incorrect on the Solaris 8/99 Media Kit. |
1999-11-19
|
| I0536-2 |
R
|
E10000 systems with an A3X00 attached may encounter Dynamic Reconfiguration errors |
2002-05-22
|
| I0534-1 |
C
|
E10000 using FDDI 6.0 software may encounter Broken Pipe errors and Dynamic Reconfiguration problems. |
1999-11-12
|
| I0527-1 |
R
|
Rebuilding an E10000 SSP boot disk or Upgrading the OS on a SSP. |
1999-10-21
|
| I0510-1 |
C
|
Following the instructions for control board switch-over with SSP 3.1 will cause all domains to panic, after the switch has taken place. |
1999-07-01
|
| I0494-1 |
C
|
Clarification of patches needed to operate E10000 System Boards. |
2004-01-07
|
| I0469-1 |
R
|
Sun FDDI SBus Adapter 5.0 SAS/DAS mounting screws may not fit the EMI plate due to excessive plating |
1998-12-24
|
| I0468-1 |
R |
After installing SF+ System Boards in an E10000 System, domains may not reboot. |
2004-01-07
|
| I0464-1 |
C |
A Power Patch is required to operate E10000 2761A System Boards. |
2004-01-07
|
| I0428-1 |
C
|
Existing Power Cord for US E10000 Systems is too long to meet UL requirements. |
1998-09-24
|
| I0417-1 |
R
|
Powering off Alt. Control Brd. in a UE10000 May Result in Total Platform Shutdown. |
2004-01-07
|
| I0412-1 |
R
|
SunATM-155 Sbus Board Replacement May Render Interface Unrecognizable. |
1998-08-05
|
| I0411-1 |
n/a
|
Installation Instructions for QFE Sbus Card on a E10000. |
1998-08-05
|
| I0405-4 |
C
|
Updated FIN. FC-AL SBus Cards, Gigabit Ethernet 1.1, SunSwift or SunFastEthernet cards should not be installed in any SBus slot labeled slot 1 on E10000 Servers. |
2004-01-07
|
| I0404-1 |
n/a
|
Configuring 336MHz CPU Modules into a Enterprise 10000 System |
1998-07-08
|
| I0403-2 |
n/a
|
UPDATED FIN. EXX00 and E10000 CPU Module Handling and Torque Sequence, E10000 I/O Mezzanine and E10000 Memory Mezzanine Torque Sequence |
1998-12-24
|
| I0396-1 |
C
|
Memory location MM to P Translation Map for the Enterprise 10000 Server. |
2004-01-07
|
| I0392-1 |
n/a
|
INFORMATION ONLY. Withdrawal of 45GB StorEdge A5000 Support for E10000 Servers. |
1998-05-16
|
| I0388-1 |
n/a
|
E10000 System Service Processor may exhibit slow response. |
1998-04-18
|
| I0375-2 |
R
|
Incomplete E10K DMRT form would impact repair cycle |
2001-02-07
|
| I0365-1 |
n/a
|
SSP 3.1 software upgrade for Sun Enterprise 10000 systems. |
1997-12-16
|
| I0364-1 |
n/a
|
The Ultra Enterprise 10000 should NOT be mentioned or appear as being supported under Solaris 2.6 |
1997-12-02
|
| I0355-2 |
n/a
|
UPDATED FIN. Use of interconnect tests during installation/upgrade of E10000 system. |
1998-05-23
|
| I0344-1 |
n/a
|
A few defective covers have been identified on the Ultra Enterprise 10000 system boards. |
1997-09-26
|
| I0342-1 |
n/a
|
Procedure for relocating a UE10000 system when the system's networking info will change. |
1997-09-13
|
| I0338-3 |
n/a
|
UPDATED FIN. E10000 System Board Handling and Cleaning Procedure. |
1998-05-22
|
| I0331-2 |
R
|
UPDATED FIN. E10000 Domain unbootable if the value for dr-max-mem is set too large.) |
2004-01-07
|
| I0326-1 |
n/a
|
FRU parts returned to Business Systems Division repair depot without failing information is impacting the FRU part repair cycle time. |
1997-09-06
|
