Document Audience: | INTERNAL |
Document ID: | I0712-1 |
Title: | Finisar GBIC problems on the storage array products |
Copyright Notice: | Copyright © 2005 Sun Microsystems, Inc. All Rights Reserved |
Update Date: | 2001-08-29 |
---------------------------------------------------------------------
- Sun Proprietary/Confidential: Internal Use Only -
---------------------------------------------------------------------
FIELD INFORMATION NOTICE
(For Authorized Distribution by SunService)
FIN #: I0712-1
Synopsis: Finisar GBIC problems on the storage array productsCreate Date: Aug/29/01
Keywords:
Finisar GBIC problems on the storage array products
SunAlert: No
Top FIN/FCO Report: No
Products Reference: Finisar GBIC on A5X00
Product Category: Storage / Service
Product Affected:
Mkt_ID Platform Model Description Serial Number
------ -------- ----- ----------- -------------
Systems Affected
----------------
Mkt_ID Platform Model Description Serial Number
------ -------- ----- ----------- -------------
- A14 - Ultra 2 -
- E3000 - Ultra Enterprise 3000 -
- E3500 - Ultra Enterprise 3500 -
- E4000 - Ultra Enterprise 4000 -
- E4500 - Ultra Enterprise 4500 -
- E5000 - Ultra Enterprise 5000 -
- E5500 - Ultra Enterprise 5500 -
- E6000 - Ultra Enterprise 6000 -
- E6500 - Ultra Enterprise 6500 -
- E10000 - Ultra Enterprise 10000 -
X-options Affected
--------- --------
X6731A - - FC-AL GBIC Module 100MB/s -
Parts Affected:
Part Number Description Model
----------- ----------- -----
370-4379-01 OE MODULE GBIC FINISAR -
540-2988-07 ASSY INTERFACE BD OE MODULE -
References:
ECO: WO_19374
MANUAL: 802-7573-16 - Sun StorEdge Installation and Service Manual
URL: http://infoserver.central/data/802/802-7573-16/pdf/015.service.pdf
http://sdpsweb.ebay/FIN_FCO/FIN/FINI0712-1_dir/Finisar_IBMGBIC.pdf
Issue Description:
This FIN is to inform the field of a new style GBIC that will be
shipping with A5X00 Storage Arrays. Installing a FINISAR GBIC in any
platform other than A5X00 will result in a restricted access condition
which may result in unanticipated downtime. Lab tests have
demonstrated that removing a FINISAR GBIC from any storage platforms
other than an A5X00 may require removal of communication/ data cables,
interface cables, and even power cables.
The new GBIC provides the same performance and external cable interface
as the current GBIC, however the module locking mechanism is different
from the currently field deployed GBIC. The new GBIC is locked into
position with module tabs. The old GBIC is locked into position with a
bailed locking mechanism.
Removing a GBIC with a bailed lock mechanism does not require a clear
space on either side of the GBIC. Removing a GBIC with locking module
tabs DOES require clear space on the lateral sides of the GBIC. Thus,
installing a Finisar GBIC in any platform other than the A5X00 may
result in a restricted access condition, which may result in unplanned
system downtime to rectify. Tests in Engineering, Factory, and ES
Reliability have concluded that removing the new GBIC from
platforms other than A5X00 is very difficult.
As a troubleshooting technique, field personnel may from time to time
swap GBICs from one A5X00 array to another A5X00 array. In order to do
this with the new Finisar GBIC, the customers may have to power off a
system, or discontinue operations while the field engineer is removing
cables in order to provide lateral access space adjacent to the GBIC
locking tabs. The new GBIC cannot be installed/removed easily from
platform to platform, and swapping FINISAR GBICs as a troubleshooting
technique may result in unanticipated downtime.
The FINISAR GBIC is locked into position with lateral module tabs. The
old GBIC is locked into position with a bailed locking mechanism. Refer
to the following URL for photo close-ups of both GBICs and the locking
mechanisms.
http://sdpsweb.ebay/FIN_FCO/FIN/FINI0712-1_dir/Finisar_IBMGBIC.pdf
Implementation:
---
| | MANDATORY (Fully Pro-Active)
---
---
| | CONTROLLED PRO-ACTIVE (per Sun Geo Plan)
---
---
| X | REACTIVE (As Required)
---
Corrective Action:
An Authorized Authorized Enterprise Services Field Representative may
avoid the above mentioned problems by following the recommendations as
shown below.
Since the new GBIC is not interchangeable from platform to platform, do
not install a FINISAR GBIC other than A5X00 storage array products.
To install or remove the GBICs, please adhere to the following procedures:
OLD STYLE (IBM):
----------------
To install: Slide the GBIC into the port with the bail in the unlocked
(up) position. Once the GBIC is firmly seated in the port,
move the bail down to the locked position.
To remove: Move the bail up to the unlocked position and pull on the
plastic tab of the bail.
NEW STYLE (Finisar):
--------------------
To install: The Finisar has a lateral latch. Slide the GBIC into the
port until you hear a click. Be sure that both sides of
the GBIC have engaged.
To remove: Push the module tabs together and pull the GBIC out of the
disk array.
Comments:
Note: The new style GBIC will only ship with new systems. The new
style GBIC will NOT ship with X-option Interface Boards, nor will
the new style GBICs be provided as a spare parts.
----------------------------------------------------------------------------
Implementation Footnote:
i) In case of MANDATORY FINs, Enterprise Services will attempt to
contact all affected customers to recommend implementation of
the FIN.
ii) For CONTROLLED PROACTIVE FINs, Enterprise Services mission critical
support teams will recommend implementation of the FIN (to their
respective accounts), at the convenience of the customer.
iii) For REACTIVE FINs, Enterprise Services will implement the FIN as the
need arises.
----------------------------------------------------------------------------
All released FINs and FCOs can be accessed using your favorite network
browser as follows:
SunWeb Access:
--------------
* Access the top level URL of http://sdpsweb.ebay/FIN_FCO/
* From there, select the appropriate link to query or browse the FIN and
FCO Homepage collections.
SunSolve Online Access:
-----------------------
* Access the SunSolve Online URL at http://sunsolve.Corp/
* From there, select the appropriate link to browse the FIN or FCO index.
Supporting Documents:
---------------------
* Supporting documents for FIN/FCOs can be found on Edist. Edist can be
accessed internally at the following URL: http://edist.corp/.
* From there, follow the hyperlink path of "Enterprise Services Documenta-
tion" and click on "FIN & FCO attachments", then choose the appropriate
folder, FIN or FCO. This will display supporting directories/files for
FINs or FCOs.
Internet Access:
----------------
* Access the top level URL of https://infoserver.Sun.COM
--------------------------------------------------------------------------
General:
--------
* Send questions or comments to [email protected]
---------------------------------------------------------------------------