| Problem Document
|
Former IBIS ID
|
Synopsis
|
Last Modified Date
|
| 1311035.1 |
|
ACSLS - SunVTL Mount Request Terminates After 5 Minutes |
2011-04-18
|
| 1310404.1 |
|
VTL - Failover and failback issue due to timeout |
2011-05-11
|
| 1300272.1 |
|
VTL - ACSLS Access Denied For Some Tapes due to VTL failover |
2011-06-07
|
| 1298998.1 |
|
VTL: Compression Data Consistency Check / Invalid data signature found |
2011-05-10
|
| 1297839.1 |
|
VTL - Physical Device on VTL Console has a red dot on the icon: Disk offline |
2011-04-14
|
| 1133104.1 |
|
VTL - Client Cannot See New Virtual Library and Drives |
2010-06-23
|
| 1133103.1 |
|
VTL - Client Cannot See New Virtual Library and Drives |
2010-07-13
|
| 1132983.1 |
|
VTL - Cannot enable NDMP support |
2011-04-28
|
| 1132935.1 |
|
VTL - Failover wizard fails reporting 3 targets but only 2 initiators |
2010-06-23
|
| 1132806.1 |
|
VTL - NetBackup getting error "Not enough space" reading virtual tape header |
2011-05-05
|
| 1132727.1 |
|
VTL - V40z server will not boot - Unexpected trap in boot loader |
2011-05-05
|
| 1132724.1 |
|
VTL - Direct connect monitor not displaying from video port |
2011-04-18
|
| 1131534.1 |
|
VTL - Receiving "decompression failed -6" errors with HiFN hardware compression card |
2011-03-29
|
| 1127825.1 |
|
VTL - Can't export to physical tape due to "incompatible media type" |
2011-04-26
|
| 1019263.1 |
237924 |
VTL - Not all usable space available |
2009-12-02
|
| 1018235.1 |
229625 |
VTL Plus - Failover not working with AIX client |
2010-02-22
|
| 1015755.1 |
224447 |
VTL - SANtricity/CAM is reporting LUNs not on preferred path |
2011-05-03
|
| 1014747.1 |
221982 |
VTL - AIX TSM client tape device configuration |
2009-11-12
|
| 1014113.1 |
220406 |
VTL - HA Nodes Appear to Have Failed Over to Each Other |
2010-08-26
|
| 1013536.1 |
219011 |
VTL - Cannot add SAN client back after replacing client host HBA |
2011-06-07
|
| 1013526.1 |
218991 |
VTL - Getting "The primary server is not in a healthy state for failback..." when trying to failback via Console GUI |
2011-04-19
|
