This section provides the most common repair procedures for the
Sun Fire V210 and V240, which are included in the following manual:
Component |
Tips |
DVD-ROM Drive (documented in 816-4826) |
- On V2x0 Systems, The DVD Drive May Not Open After Being Replaced
(FAB 1000005.1).
|
Fan |
- Identifying an older system that requires an X-Option FAN Upgrade
Kit (X7418A) when adding 1GB memory DIMMs on Sun Fire V210 systems (FIN I1117-1).
|
JBus |
- JETO (JBus Error Time Out) can be encountered on any system with the JBus
(FAB 1019032.1).
|
Memory |
-
Minimum OBP version is required to support new DIMMs with
333MHz dual data rate.
(FIN I1148-1).
- Systems will fail to pass self-test if the OBP version is below the
required minimum level to support the JEDEC SPD 1.0 formatted DIMMs (FIN I1092-1).
|
PCI Card |
- Sun Fire V210/V240 PCI retainer clip may contact PCI board components causing damage.
(FAB 1000005.1).
|
PCI Riser Card (V240) |
- A short circuit on the V240 PCI Riser Card connector following reconfiguration
or reassembly may cause charring of the Motherboard or system power-down
(FIN I1075-1).
|
Rack |
- Sun 72" Delorean rack kit for the Sun Fire V210/V240 is
missing mounting screws (FIN I1142-1).
|
System Board |
-
A short circuit on the V240 PCI Riser Card connector
following reconfiguration or reassembly may cause charring of the
Motherboard or system power-down (FIN I1075-1).
-
How to identify System Board FRUID change after CPU
upgrade to Sun Fire V210/V240 and Netra 240 systems (FIN I1064-1).
-
Sun Fire V210/V240 server onboard ethernet ports may
silently corrupt received network packets (FCO A0214-1).
|