| FAB
|
Implementation
|
Synopsis
|
Last Modified Date
|
| A0150-1 |
C
|
DLT7000 tape drives may fail with right column of LED's flashing. |
Aug 31 1999
|
| I0547-1 |
C
|
Intermittently, SCSI devices connected to a UDWIS card may |
2000-01-21
|
| I0519-1 |
n/a
|
Networker may attempt to position a DLT7000 volume to read the label before the drive has completed the load sequence |
1999-09-16
|
| I0495-1 |
R
|
DLT7000 door handle shaft may sustain damage if not in closed position before shipping. |
1999-06-18
|
| I0448-1 |
C |
DLT 7000 drive Take-Up Leader and Cartridge Leader misalignment may cause the unit to fail. |
2004-01-07
|
| I0435-1 |
R
|
DLT7000s may exhibit poor performance due to an incorrect st.conf file entry. |
1998-11-05
|
| I0407-1 |
R
|
The Care and Inspection of DLT Cartridge Tapes. |
1998-08-08
|
| I0380-2 |
n/a
|
UPDATED FIN. LibMON 1.0 is not compatible with Solaris 2.6 |
2004-01-07
|
| I0360-1 |
n/a
|
The ATL 4/1800 and ATL 7/3500 have temperature sensors that are programmed by the vendor. Some units have been shipped with sensors that were not programmed. |
1997-11-15
|
| I0349-1 |
n/a
|
The two tape drive versions of the ETL 7/3500 and ETL 4/1800 are missing cables, which are needed to install additional drives. |
1997-09-27
|
