| FAB
|
Former ID
|
Synopsis
|
Last Modified Date
|
| 1017446.1 |
228550 |
Sun StorEdge 3310/3510 Array May Stop Processing I/O When More Than 2 Hosts Send SCCLI Commands. |
2010-08-27
|
| 1017358.1 |
228422 |
Sun StorEdge 3310/3510/3511 controllers must be allowed to complete the firmware cross loading process during controller replacement. |
2010-08-27
|
| 1001302.1 |
201762 |
Important Sun Alert Documents Released For SE3310, SE3320, SE3510 And SE3511 Arrays. |
2010-09-01
|
| 1001175.1 |
201569 |
SES firmware downloads to StorEdge 351x are disruptive and should only be done when there is no I/O to the array. |
2010-08-23
|
| 1001029.1 |
201356 |
Sun StorEdge 3510 Arrays May Experience Unexpected SCSI Enclosure Services (SES) Events |
2010-08-25
|
| 1000862.1 |
201143 |
SE3310/3510/3511 Arrays may experience a variety of issues if the SCSI I/O Timeout value is set too low |
2010-08-31
|
| 1000836.1 |
201116 |
1080 SES firmware available for StorEdge 3510FC running 3.27R. |
2010-11-03
|
| 1000682.1 |
200894 |
Array performance degradation as a result of the cache changing to write-through. |
2010-08-26
|
| 1000391.1 |
200514 |
PFIN - Duplicate Chassis IDs - SE3510FC and SE3511FC w/ SATA Array |
2010-08-24
|
| 1000227.1 |
200302 |
StorADE versions earlier than 2.4.39.005 may misrepresent errors for array components, possibly causing unnecessary replacement of hardware. |
2011-02-22
|
| 1000198.1 |
200251 |
Improved firmware for Seagate 10K.6 disk drives will reduce the incidence of unexpected outages due to a spindle motor issue. |
2011-02-10
|
