Sun Storage 3510 FC Array
 
Sun Storage 3511 SATA Array
 

GCS>Sun Microsystems>Sun FAB>Standard>Reactive
 

The purpose of this bulletin is to warn that duplicate Chassis IDs
of a SE3510 or SE3511 in a raid controller + JBOD configuration could
cause change in the array configuration at power on of array.
A manual change of Chassis-IDs could occur during installation/
replacement of a SE3510/SE3511/JBOD while handling units with the
Chassis-id switch cover removed. A change of ID may cause duplicate
IDs to exist. Multi-unit configurations will have drive assignment
conflicts when two or more units have the same Chassis-id at power
on. Each array in the partner configuration is required to have a
unique Target ID. Configurations with drive assignment conflicts will
not have access to any preconfigured Logical Drives.

Prior to any installation/replacement of a SE3510/SE3511/JBOD
in a 3510/3511+JBOD/JBODs configuration, document the ID switch
settings by serial number for each of the arrays. Complete the
installation/replacement and before replacing the Chassis ID
Switch Cover Panels(ears) visually verify that the Chassis IDs
are correct and that there are not any conflicts prior to power on.

This solution has no attachment