| Processor |
| Number |
1 or 2 Dual-Core or Quad-Core |
| Architecture |
Type: Intel Dual-Core or Quad-Core Processors |
| CPUs |
Dual-Core Intel Xeon X5260 (6MB L2, 3.33 GHz, 1333 MHz FSB, 80W)
Dual-Core Intel Xeon X5270 (6MB L2, 3.50 GHz, 1333 MHz FSB, 80W)
Quad-Core Intel Xeon L5420 (2x6MB L2, 2.5 GHz, 1066 MHz FSB, 50W)
Quad-Core Intel Xeon E5410 (2x6MB L2, 2.33 GHz, 1066 MHz FSB, 80W)
Quad-Core Intel Xeon E5440 (2x6MB L2, 2.83 GHz, 1333 MHz FSB, 80W)
Quad-Core Intel Xeon E5450 (2x6MB L2, 3.0 GHz, 1333 MHz FSB, 80W)
Quad-Core Intel Xeon X5460 (2x6MB L2, 3.16 GHz, 1333 MHz FSB, 120W)
Quad-Core Intel Xeon L5430 (2x6MB L2, 2.66 GHz, 1333 MHz FSB, 50W)
Quad-Core Intel Xeon X5470 (2x6MB L2, 3.33 GHZ, 1333 MHz FSB, 120W)
|
| Cache memory |
6MB Level 2 for Dual-Core
2x6MB Level 2 for Quad-Core |
| Main Memory |
| Capacities |
Total DIMM slots: 16
DIMM type: PC2-5300 DDR2 667MHz Registered DIMMs (128 bit plus ECC
databus)
DIMM size: 2-GB or 4-GB
Maximum capacity: 64GB (when configured with 4-GB DIMMs)
NOTE: DIMMs must be installed in pairs.
Pairs of different densities may be mixed.
|
| Standard
Integrated Interfaces |
| Network |
Four 10/100/1000 Base-T Ethernet Ports
|
| Network Management |
One dedicated 10/100Base-T Ethernet port |
| Serial Management |
One dedicated TIA/EIA-232-F asynchronous RJ45 port |
| SAS |
Eight channel SAS interfaces for internal or external drives with add-on SAS
Host Bus Adapter. |
| USB |
Front: Two USB 2.0 ports
Rear: Two USB 2.0 ports
Internal: One USB 2.0 port |
| PCI Expansion Slots |
Six internal MD2 low profile 8-lane PCI Express slots
(all with x8 mechanical connectors) |
| Internal Mass Storage |
| Disks |
SAS: Up to sixteen internal 2.5" SAS Disks with add-on SAS Host Bus Adapter
Drive Type
|
Density
|
Speed
|
Form Factor
|
SAS
|
73 GB
|
10,000 RPM
|
2.5"
|
SAS
|
73 GB
|
15,000 RPM
|
2.5"
|
SAS
|
146 GB
|
10,000 RPM
|
2.5"
|
SAS
|
300 GB
|
10,000 RPM
|
2.5"
|
|
| DVD-ROM |
One EIDE DVD+/-RW drive |
| Power Supplies |
Dual redundant, hot swappable power supplies
(Power supply rating output = 1050W)
(UL Maximum AC input = 1050W x 1.33 efficiency = 1397W)
(12 Amps RMS at 100 VAC)
|
| Environment |
| AC power |
90-264 V AC (47-63 Hz) |
| Temperature |
Single, non-rack system:
Operating: 5° C to 35° C (41° F to 95° F)
Nonoperating: -40° C to 70° C (-40° F to 158° F)
|
| Humidity |
Single, non-rack system:
Operating: 10% to 90% relative humidity noncondensing,
38° C (100.4° F) max wet bulb
Nonoperating: up to 93% relative humidity noncondensing |
| Altitude |
Single, non-rack system:
Operating: up to 3048 m (10000 ft.), maximum ambient
temperature is derated by 1° C per 300 m above 900 m
Nonoperating: 15kPa |
| Acoustic noise |
Single, non-rack system:
LwAd (1B=10dB)
7.7 B at max ambient
LwAd bystander
65.8 dB at max ambient
|
Regulations
Meets or exceeds the following
requirements: |
| RoHS Compliance Level |
RoHS:YL |
| Safety |
IEC60950, UL/CSA60950, EN60950, CB Scheme with all country
differences |
| RFI/EMI |
FCC CFR 47 Part 15 Class A, EN55022 Class A, EN 61000-3-2,
EN61000-3-3, EN 300-386 |
| Immunity |
EN55024, EN300-386 |
| Certifications |
Safety: UL/cUL, UL DEMKO, CE, BSMI, CCC, GOST-R, S-Mark
EMC: CE, FCC, VCCI, ICES, C-Tick, MIC, CCC, GOST-R, BSMI Class A
|
| Other |
Complies with WEEE Directive (2002/96/EC) and RoHS Directive (2002/95/EC) |
| Dimensions and Weight |
| Height |
88 mm (3.49 in.) |
| Width (not including ears) |
426 mm (16.75 in.) |
| Width (including ears) |
426 mm (16.75 in.) |
| Depth (not including PSU handle) |
714 mm (28.125 in.) |
| Depth (including PSU handle) |
733.65 mm (28.88 in.) |
| Weight |
25.6 kg (56.3 lb.) maximum assuming PCI-Express card weighs 0.12 kg
(0.25 lb) each, and without the rack mounting slide rail kit installed.
|
| Rack Mounting |
| Sun Fire x4250 Server Racks |
Racks are as follows:
- Sun Rack 900
- Sun Rack 1000-38
- Sun Rack 1000-42
- Third Party EIA-310-D-1992
|
