FAB
|
Implementation
|
Synopsis
|
Last Modified Date
|
A0186-1 |
U
|
SunPCi II and SunPCi IIpro cards may not respond after rapid/successive power cycling. |
Dec 03 2001
|
A0182-2 |
U
|
Systems with 18.2GB and 36GB IBM disk drives may experience higher than expected failure rate. |
Feb 07 2005
|
A0174-1 |
C
|
Enterprise 250 systems may experience CPU module failures or DOA conditions during POST. |
Dec 20 2000
|
A0164-1 |
C
|
Systems with FC100/P cards (QL2100 PCI FC-AL HBA) having Molex optical transceivers, may cause increasing numbers of loop errors, excessive LIPs, and SCSI parity errors as they age. |
May 12 2000
|
A0160-1 |
U
|
Enterprise 450 and Enterprise 250 systems with PCI FC-AL host adapter interface cards may experience loop reset problems. |
Dec 24 1999
|
A0139-1 |
U
|
Any Ultra PCI-based system with the PGX Graphics PCI Frame Buffer installed may display a vertical black stripe while running in the OpenWindows environment. |
Nov 25 1998
|
I0570-3 |
R
|
Provide instructions and guidelines to CORRECTLY identify Ecache panic fault diagnosis. |
2000-07-07
|
I0541-2 |
R
|
Restrictions on multi-initiator config using FC100/P card on A5x00 |
2001-08-02
|
I0485-1 |
R
|
Sun Enterprise 250 Server 400MHZ CPU Modules may sustain damage during installation. |
1999-05-22
|
I0484-1 |
R
|
Problems loading Solaris 2.5.1 Supplement CD on E250's running Solaris 2.5.1 11/97. |
1999-04-08
|
I0443-1 |
n/a
|
Default NVRAM parameters on E250 Servers shipped between 09/05/98 and 09/25/98 may be set incorrectly. |
1998-10-31
|
I0427-1 |
R
|
Failure to remove power cables from E250 System Board may result in NVRAM corruption. |
1998-09-22
|