This section provides tips for the most common repair procedures
for the Sun StorEdge 6140 Array. Sun StorEdge 6140 Array documentation can be found here.
Sun StorEdge 6140 Array Documentation
|
Component
|
Tips
|
|
Disk Drives
|
-
Some SATA Drives have incorrectly shipped with a Rev 4 DACstore installed.
(FAB 1019666.1).
-
Interposer cards on the SATA Drive have been damaged due to the
loosening of drive bracket screws on the drive assembly.
(FIN 1000958.1).
-
Data In Place Migration Process for Sun StorageTek 6000 and
Flexline Arrays.(FAB 1000140.1).
|
| CSM200 Drive Cage Midplane |
-
Misaligned spring connectors on CSM200 midplanes can cause HDD signal integrity issues
for StorageTek 5320/5220 and 6140 Controller trays and CSM200 Expansion trays.
(FAB 1019584.1).
-
Number of screw holes used for mounting CSM200 Drive Cage Midplane may not match the number of
screw holes in the tray Chassis.
(FAB 1019216.1).
|
| Array Controller |
-
Updated procedures for upgrading a Sun Storage Tek 6140/6540 or FLX380 Array controller firmware from 6.x to 7.50 (or higher).
(FAB 1020565.1).
-
Controller replacement in Sun StorageTek 6140 and Sun StorageTek 6540 Arrays may initiate
a Crystal firmware upgrade on the other controller.
(FAB 1019884.1).
-
The Ethernet port on the StorageTek 25x0/61x0/6540 controllers may not work properly while
attached to an Ethernet Switch port with auto-negotiation disabled.
(FAB 1000790.1).
|
| Firmware |
-
Firmware downgrades from 07.1x.xx.xx require special procedures and approval.
(FAB 1019709.1).
-
Crystal firmware 7.10.xx.xx upgrades will require a special Upgrade Utiltiy to install.
(FAB 1019209.1).
|
| Power Supply |
- StorageTek 6140 Family contains incorrect UL power supply
label (FAB 1019519.1).
|
