| FAB
|
Former ID
|
Synopsis
|
Last Modified Date
|
| 1171913.1 |
|
Battery Expiration is no longer cause for replacement on Storage 6x80 and 25x0 Arrays. |
2011-04-20
|
| 1020499.1 |
259488 |
Some Arrays cannot be registered to Auto Service Request due to the Array's serial number shown on the label does not match IBIS records. |
2010-09-21
|
| 1019709.1 |
244287 |
Firmware downgrades from 07.xx.xx.xx require special procedures and approval. |
2010-09-21
|
| 1001125.1 |
201507 |
SATA drive support for 25xx Array requires 06.70.00.1 or later Controller Firmware. |
2010-10-28
|
| 1001057.1 |
201384 |
On StorageTek 2501/2530/2540 one or both controllers I/O to disk drives may timeout until drives are disabled. |
2010-11-03
|
| 1000790.1 |
201067 |
The Ethernet port on the StorageTek 25x0/61x0/6540 controllers may not work properly while attached to an Ethernet Switch port with auto-negotiation disabled. |
2010-08-30
|
| 1000633.1 |
200840 |
On StorageTek 2540 arrays, duplicate World Wide Port Names (WWPN) may be assigned to controllers in separate subsystems. |
2011-03-01
|
| 1000284.1 |
200399 |
Clarification of the cables used for establishing a serial connection to the STK6140 and STK25x0 arrays. |
2011-04-29
|
