![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||||
Solution Type Technical Instruction Sure Solution 1488479.1 : How to Remove and Replace Sun Blade 1500 Red Front Fan:ATR:1488479.1:0
In this Document
Applies to:Sun Blade 1500 Workstation - Version Not Applicable to Not Applicable [Release N/A]Information in this document applies to any platform. GoalSun Blade 1500 Red - How to Remove and Replace Front Fan Fix
DISPATCH INSTRUCTIONS OBTAIN CUSTOMER ACCEPTANCE WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? : A data backup is not a pre-requisite but is a wise precaution. WHAT ACTION DOES THE FIELD ENGINEER/CUSTOMER ADMINISTRATOR NEED TO TAKE: Removing the Front Fan 1. Power off the system and open the chassis. 2. Locate the front fan. 3. Remove the front fan cable from the bezel cable clip. 4. Disconnect the front fan cable. 5. Release the front fan bracket. Caution – Do not operate the workstation without the front fan.
Installing the Front Fan 1. Locate where the front fan is to be installed. 2. Remove the front fan assembly from its packaging. 3. Align the front fan bracket with the chassis. 4. Secure the front fan bracket. 5. Connect the front fan power cable to the motherboard connector FAN0 SYS 6. Route the front fan cable through the bezel cable clip. 7. Inspect the front fan, fan cabling 8. Install the access panel, power on the system, and verify the component installation.
WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN the SYSTEM TO AN OPERATIONAL STATE:
https://support.oracle.com/handbook_private/Systems/SunBlade1500/components.html#Fan
ADDITIONAL COMMENTS: Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual (Red): http://docs.oracle.com/cd/E19127-01/blade1500.ws/816-7564-11/816-7564-11.pdf Attachments This solution has no attachment |
||||||||||||||
|