![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||||
Solution Type Technical Instruction Sure Solution 1474002.1 : Display HBA Control Path's ( luxadm)
This Command will help to display the path and status of the HBA In this Document
Applies to:Sun StorageTek SL3000 Modular Library System - Version All Versions to All Versions [Release All Releases]Information in this document applies to any platform. GoalDisplay HBA information and status FixThe luxadm command can be used to display the path to the FC HBA device and the status of the connection.
#luxadm -e port
1. CONNECTED means that there is a FC device connected on the HBA controller port 2. NOT CONNECTED means that there is no FC device connected on the HBA controller port 3. /devices/pci@7,700000/SUNW,qlc@0,1/fp@0,0:devctl is the physical pathname to the host controller port. 4. /devices/pci@4,600000/SUNW,qlc@0,1/fp@0,0:devctl - "pci" indicates the PCI bus to which the HBA is plugged in
5. /devices/pci@4,600000/SUNW,qlc@0,1/fp@0,0:devctl - "@4" is the instance of the PCI controller.
6. /devices/pci@4,600000/SUNW,qlc@0,1/fp@0,0:devctl - "SUNW,qlc" refers to the HBA device driver.
In the case of Oracle branded HBAs, the following device drivers are available: qlc - Qlogic hba from Sun/Oracle emlxs - Emulex hba from Sun/Oracle
For Non Oracle HBA
lpfc- emulex from Emulex
qla - qlogic hba from Qlogic
qlt - COMSTAR driver for a target QLogic 4G HBA
(Used with ACSLS logical libraries)
7. /devices/pci@4,600000/SUNW,qlc@0,1/fp@0,0:devctl - "0,1" points to the second controller in the same HBA and in same PCI Bus (i.e., in a 2-port HBA);
8. /devices/pci@4,600000/SUNW,qlc@0,1/fp@0,0:devctl - "fp" is the FC port controller's device driver
Attachments This solution has no attachment |
||||||||||||||
|