| Asset ID: |
1-71-1473741.1 |
| Update Date: | 2012-07-10 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1473741.1
:
SL48 - When a SL48 Chassis is Replaced, Does The Serial Number Change
| Related Items |
- Sun StorageTek SL48 Tape Library
|
| Related Categories |
- PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: OEM Drive and Library
|
In this Document
Applies to:
Sun StorageTek SL48 Tape Library - Version All Versions and later
Information in this document applies to any platform.
Goal
SL48 - When a SL48 Chassis is Replaced, Does The Serial Number Change
Fix
When you replace the SL48 chassis, the chassis S/N is recorded on the Robot and the controller card. With a chassis FRU replacement, the original SL48 controller card is installed in the new FRU chassis, on power up the OCP will ask:
Identity Data Mismatch
Serial No. Mismatch between
Chassis and Controller
Use Data From: Chassis/Controller
The front panel up and down buttons will select whichever S/N you want. Should always chose Chassis to keep the FRU chassis S/N.
Attachments
This solution has no attachment
