Sun Netra T5440 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

Applies to:

Goal

How to replace a Netra T5440 Battery Module

***********************************************************
To report errors or request improvements on this procedure,
please Add a Comment on Doc ID: 1462987.1
***********************************************************

Fix

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
Nothing beyond basic partner training to be qualified as a Sun Service Delivery Partner

TIME ESTIMATE: 30 minutes

Task Complexity: 0

FIELD ENGINEER INSTRUCTIONS

PROBLEM OVERVIEW:  Defective battery module

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?
A data backup is not a pre-requisite but is a wise precaution.
System needs to be shutdown by customer

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
*** Follow standard ESD procedures to avoid Electrostatic Discharge

A) Remove Battery

1. Remove the Top Cover

2. Remove the PCI Mezzanine Assembly

3. Gently depress the release tab and pull the battery out of the battery housing


B) Install Battery

1. Carefully press the new battery in the slot

2. Install the PCI Mezzanine Assembly

3. Install the Top Cover


OBTAIN CUSTOMER ACCEPTANCE:

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Verify functionality, no service LEDs or messages.

PARTS NOTES:    https://support.oracle.com/handbook_private/Systems/Netra_T5440/components.html#SystemBoard

REFERENCE INFORMATION:   http://docs.oracle.com/cd/E19874-01/index.html

This solution has no attachment