Asset ID: |
1-71-1461176.1 |
Update Date: | 2012-09-04 |
Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1461176.1
:
How to Remove and Replace a SPARC T4-1B System Configuration PROM:ATR:1461176.1:0
Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
|
In this Document
Applies to:
SPARC T4-1B - Version Not Applicable and later
Information in this document applies to any platform.
Goal
How to Remove and Replace a SPARC T4-1B System Configuration PROM
********************************************************************************
To report errors or request improvements on this procedure,
please Add a Comment on Doc ID: 1461176.1
********************************************************************************
Fix
DISPATCH INSTRUCTIONS
WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
T4-1B training is desirable but not required
TIME ESTIMATE: 30 minutes
TASK COMPLEXITY: 0
FIELD ENGINEER INSTRUCTIONS
PROBLEM OVERVIEW: System ID PROM (SCC) failure
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
The system ID PROM, sometimes referred to as the SCC, provides the server module with the host ID, MAC addresses, and some Oracle ILOM configuration information.
The system ID PROM does not typically require replacement. However, if you replace the ID PROM, be aware that the host ID and MAC address will change.
Prepare for service by performing the following tasks:
Shut Down the Oracle Solaris OS
Prepare the Server Module for Removal
Remove the Server Module From the Modular System
Remove the Cover
ESD Safety Measures
WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
Remove the ID PROM
Locate the ID PROM on the motherboard.
Lift the ID PROM straight up from its socket.
Install the ID PROM.
Align the ID PROM notched end with the notched end on the motherboard socket and press in place.
Return the server module to operation.
OBTAIN CUSTOMER ACCEPTANCE
Verify the ID PROM
The host MAC address and the Host ID values are stored in the ID PROM. This task describes ways to display these values.
1. Display the MAC address that is stored in the ID PROM.
Example using the Oracle ILOM show command:
-> show /HOST macaddress
2. Display the host ID.
Example using the Solaris hostid command:
# hostid
857f6844
3. Display the Ethernet address.
Example using the Solaris ifconfig command:
# ifconfig -a
WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Boot system and monitor boot sequence for errors. Test functionality of system. Restart software applications per applicable administration guides to resume system operation.
PARTS NOTE:
https://support.oracle.com/handbook_private/Systems/SPARC_T4_1B/SPARC_T4_1B.html
REFERENCE INFORMATION:
SPARC T4-1B Server Module Service Manual at http://docs.oracle.com/cd/E22735_01/html/E22736/gentextid-6458.html#scrolltoc
Attachments
This solution has no attachment