Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1459388.1
Update Date:2012-05-22
Keywords:

Solution Type  Technical Instruction Sure

Solution  1459388.1 :   SL3000 - Set Up for SNMP V2.x Configuration  


Related Items
  • Sun StorageTek SL3000 Modular Library System
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
  •  




In this Document
Goal
Fix


Created from <SR 3-5680108741>

Applies to:

Sun StorageTek SL3000 Modular Library System - Version All Versions and later
Information in this document applies to any platform.

Goal

How do i set up V2.x SNMP on an SL3000?
 

Fix

Here is an example base configuration for setting SNMP v2 MIBs on SL3000:


Please note, this sets the trap level for 'Error,Warning and Informational' messages only, further, more detailed message levels are available. Level 3 messages may produce excessive output. Customer /FE should refer to the SL3000 SNMP Guide  (316194501B SL3000 SNMP Reference Manual (September 2009, Revision B)) for further information on other traps that can be set and for the setting of any 'Serviceinfo' settings.

* Before proceeding, ascertain SNMP requirements with end user. The SNMP reference manual contains a template and examples for creation of SNMP variables for both SNMP v2 and v3.


1.Log in as 'admin' to SL3000 CLI via FE port
2.SL3000> snmp
                         addUser version v2c community public
                         addTrapRecipient trapLevel 1,2,3 host xx.xx.xx.xx version v2c community public        * xx.xx.xx.xx = IP of recipient. Repeat as requested by customer.
                         enable port 2B                                                                                                    * Repeat if the is dual Dual TCP/IP configuration for port 2A
                         listTrapRecipients                                                                                                * Review
                         listUsers
                         configureServiceinfo set
                                     contact ‘’
                                     streetAddr ‘’
                                     city ‘’
                                     state ‘’
                                     country ‘’
                                     zip ‘’
                                     description ‘’
                                     phone ‘’                     * These are optional. Use any or all.



3.SL3000> exit


 


Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback