Netra T3-1
 
Netra SPARC T4-1 Server
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

Applies to:

Goal

Service the LED board

********************************************************************************
To report errors or request improvements on this procedure,
please go to http://support.us.oracle.com and put a comment on Doc ID: 1458845.1
********************************************************************************

Fix

 DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
Netra SPARC T3/4 Knowledge

TIME ESTIMATE: 30 minutes

TASK COMPLEXITY: 1

FIELD ENGINEER INSTRUCTIONS

PROBLEM OVERVIEW: LED board failure

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
Shut down system and Power down the server.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

A. Remove LED board:

1. Remove top cover.

2. Remove the DVD tray.

3. Remove the fan board.

4. Remove the six screws that secure the LED board to the DVD tray

5. Lift the LED board away from the DVD tray and set the LED board aside.


B. Install LED board:

1. Align the LED board to the location where it installs onto the DVD tray.  The LEDs are the front of the bracket.

2. Secure the LED board to the DVD tray with the six screws.

3. Install the fan board.

4. Install the DVD tray.

5. Install the top cover


OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Turn on the system and verify functionality.

PARTS NOTE: 542-0391 [C]  DVD Tray Assembly  (same part on Netra T3 & T4)

REFERENCE INFORMATION: Netra SPARC T3-1 Service Manual, p/n E20693-xx 

or Netra SPARC T4-1 Service Manual, p/n E23206-xx

This solution has no attachment