Asset ID: |
1-71-1456146.1 |
Update Date: | 2012-05-17 |
Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1456146.1
:
Repair of x86 ILOM error: "Warning: The system appears to be in manufacturing test mode."
Related Items |
- Sun Blade X6450 Server Module
- Sun Fire X4150 Server
- Sun Netra X4200 M2 Server
- Sun Fire X4440 Server
- Sun Blade X6240 Server Module
- Sun Fire X4540 Server
- Sun Fire X4250 Server
- Sun Blade X6220 Server Module
- Sun Netra X4270 Server
- Sun Fire X4200 Server
- Sun Fire X4275 Server
- Sun Netra X4450 Server
- Sun Netra X6270 M2 Server Module
- Sun Fire X4600 M2 Server
- Sun Fire X4240 Server
- Sun Blade X6270 Server Module
- Sun Fire X4200 M2 Server
- Sun Blade X6440 Server Module
- Sun Fire X4470 Server
- Sun Fire X4140 Server
- Sun Server X2-8
- Sun Blade X6250 Server Module
- Sun Fire X2250 Server
- Sun Fire X4270 M2 Server
- Sun Fire X4100 M2 Server
- Sun Blade X6275 M2 Server Module
- Sun Fire X4170 Server
- Sun Blade X6275 Server Module
- Sun Fire X2270 M2 Server
- Sun Fire X4100 Server
- Sun Blade X6270 M2 Server Module
- Sun Blade X6420 Server Module
- Sun Fire X4600 Server
- Sun Fire X4270 Server
- Sun Fire X4640 Server
- Sun Netra X4250 Server
- Sun Fire X4170 M2 Server
- Sun Fire X4450 Server
- Sun Server X2-4
- Sun Fire X4500 Server
- Sun Fire X4800 Server
|
Related Categories |
- PLA-Support>Sun Systems>x64>Server>SN-x64: MISC-SERVER
|
Applies to:
Sun Blade X6450 Server Module - Version Not Applicable and later
Sun Fire X2270 M2 Server - Version Not Applicable and later
Sun Blade X6250 Server Module - Version Not Applicable and later
Sun Netra X6270 M2 Server Module - Version Not Applicable and later
Sun Fire X4170 M2 Server - Version Not Applicable and later
Information in this document applies to any platform.
Goal
Customers may see either one or both of these warnings on the service processor.
On the GUI interface:
"Warning: The system appears to be in manufacturing test mode. Contact Service immediately."

or
On the CLI interface:
*** WARNING *** *** WARNING *** *** WARNING ***
The system appears to be in manufacturing test mode.
Contact Service immediately.
Fix
The service processor inadvertently has the manufacturing test mode still enabled.
To correct the issue and stop the warning message, perform a "factory reset" from either from GUI or CLI.
WARNING! This will cause any custom configuration (such as the IP configuration to be changed back to factory default.)
This is an indication that the ILOM has the Sun Service mode enabled. When enabled, this will allow the user to run restricted service commands.
This mode can be disabled by two methods:
Method #1
By Oracle personnel by running the following command in Escalation mode:
bash-2.05b# /usr/local/bin/sunserviceacct disable
See document 1019946.1 to create an escalation mode account & to get into escalation mode.
Method #2
Perform a "factory reset" either from GUI or CLI. WARNING! This will cause any custom configuration (such as the IP configuration to be changed)
Reset the Oracle ILOM Configuration to Defaults (GUI method)
- Log in to the Oracle ILOM SP or CMM web interface.
- Click Maintenance --> Configuration Management.
The Configuration Management page appears.

- In the Reset Defaults drop-down list, click Reset Defaults, and then select one of the following options:
-
Factory - If you want to reset all of the Oracle ILOM configuration data to the default settings and also erase the log files, select Factory and click Reset Defaults. The next time the Oracle ILOM SP reboots, the configuration will be restored to the default settings and the log files will be erased.
-
None - If you want to cancel the reset to defaults operation just previously issues, select None and click Reset Defaults. The previously issued reset to defaults operation is canceled provided the None option is executed before the Oracle ILOM SP reboots.
Reset the Oracle ILOM Configuration to Defaults (CLI method)
- Log in to the Oracle ILOM CLI SP or CMM.
- Change to the /SP directory, type:
-> cd /SP
- Type one of the following commands, depending on the option you select to reset the default settings.
- If you want to reset the Oracle ILOM configuration using the factory option, type:
-> set reset_to_defaults=factory
On the next reboot of the Oracle ILOM SP, the Oracle ILOM configuration default settings will be restored and the log files will be erased.
- If you want to cancel a reset operation just previously specified, type:
-> set reset_to_defaults=none
The previously issued reset_to_defaults command is canceled provided the reset_to_defaults=none command is issued before the Oracle ILOM SP reboots.
Attachments
This solution has no attachment