SPARC T3-1B
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
 

In this Document

Goal

Fix

Applies to:

Goal

How to Remove and Replace a SPARC T3-1B USB Flash Drive

*********************************************************************
To report errors or request improvements on this procedure,
please Add a Comment on Doc ID: 1444742.1
*********************************************************************

Fix

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
T3-1B training is desirable but not required

TIME ESTIMATE: 30 minutes

TASK COMPLEXITY: 0

FIELD ENGINEER INSTRUCTIONS

PROBLEM OVERVIEW: failed USB flash drive

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

Shut Down the Oracle Solaris OS
Prepare the Server Module for Removal
Remove the Server Module From the Modular System
Remove the Cover
ESD Safety Measures

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

Remove a USB Flash Drive

1. Locate the USB flash drive at the rear of the server module.
2. Pull the drive out.

Install a USB Flash Drive

1. Locate the USB connector on the motherboard.
2. Plug your USB flash drive into the upper port of the USB connector.
3. Return the server module to operation.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Boot system and monitor boot sequence for errors. Test functionality of system. Restart software applications per applicable administration guides to resume system operation.

PARTS NOTE:
https://support.oracle.com/handbook_private/Systems/SPARC_T3_1B/SPARC_T3_1B.html

REFERENCE INFORMATION:
SPARC T3-1B Server Module Service Manual at http://docs.oracle.com/cd/E19332-01/E24985/gentextid-5145.html#scrolltoc

This solution has no attachment