Sun Storage 7000 Unified Storage System: How to check iSNS/RADIUS settings on ZFSSA

Asset ID:	1-71-1398633.1
Update Date:	2012-05-30
Keywords:

Solution Type Technical Instruction Sure

Solution 1398633.1 : Sun Storage 7000 Unified Storage System: How to check iSNS/RADIUS settings on ZFSSA

Applies to:

Sun Storage 7410 Unified Storage System - Version Not Applicable to Not Applicable [Release N/A]
Sun Storage 7720 Unified Storage System - Version Not Applicable to Not Applicable [Release N/A]
Sun Storage 7210 Unified Storage System - Version Not Applicable to Not Applicable [Release N/A]
Sun ZFS Storage 7320 - Version Not Applicable to Not Applicable [Release N/A]
Sun ZFS Storage 7420 - Version Not Applicable to Not Applicable [Release N/A]
7000 Appliance OS (Fishworks)

Goal

This document describes how to obtain information about iSNS and RADIUS settings on Oracle ZFS Storage Appliance (ZFSSA.)

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - 7000 Series ZFS Appliances

Fix

Identifying if iSNS Discovery Is Set up Correctly on the ZFSSA:

This section is valid ONLY WHEN you are using iSNS as a discovery method of iSCSI devices from the host.

ZFSSA must be registered if you are using iSNS as a discovery method for initiator to find iSCSI IQNs. The following command shows you the IP address or host name of iSNS server. If you are using the host name, make sure it can be resolved to it's IP address correctly. (The following example DOES NOT have any of iSNS properties.)

oratkyar1:> configuration services iscsi

oratkyar1:configuration services iscsi> show

Properties:

<status> = online

isns = (unset)

isnsserver = (unset)

radiussecret = (unset)

radiusserver = (unset)

Identifying if ZFSSA is Set Up Correctly for RADIUS Authentication:

This section is valid ONLY WHEN you plan to use RADIUS as a means of iSCSI authentication. You need to consult with the respective product documentation to set up a RADIUS server.
The following command shows you the IP address or host name of the RADIUS server and the RADIUS secret. If you are using the host name for RADIUS server, make sure it can be resolved to it's IP address correctly. (The following example DOES NOT have any of RADIUS properties.)

oratkyar1:> configuration services iscsi

oratkyar1:configuration services iscsi> show

Properties:

<status> = online

isns = (unset)

isnsserver = (unset)

radiussecret = (unset)

radiusserver = (unset)

Return to <Document 1398581.1> Sun Storage 7000 Unified Storage System: How to Troubleshoot iSCSI Problems.

References

<NOTE:1398581.1> - Sun Storage 7000 Unified Storage System: How to Troubleshoot iSCSI Problems

Attachments

This solution has no attachment