![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||
Solution Type Technical Instruction Sure Solution 1349667.1 : How to Remove and Replace a Ultra 20 Workstation System Battery:ATR:1349667.1:0
In this Document
Applies to:Sun Ultra 20 Workstation - Version: Not Applicable to Not Applicable - Release: N/A to N/AInformation in this document applies to any platform. GoalHow to remove and replace a Ultra 20 Workstation System BatterySolutionDISPATCH INSTRUCTIONS- WHAT SKILLS DOES THE ENGINEER NEED: - TIME ESTIMATE: 15 minutes - TASK COMPLEXITY: 0 FIELD ENGINEER INSTRUCTIONS: - PROBLEM OVERVIEW: Replacing the System Battery - WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?: - WHAT ACTION DOES THE ENGINEER NEED TO TAKE: To remove and install the battery: Caution - If you remove the system battery, you could erase all system-specific information saved in the CMOS. 1. Turn off the power button on the back panel and all of the peripherals connected to the workstation. 2. Remove the left-side access panel. 3. Gently lay the system on its right side on a stable, nonslip surface. 4. Pinch the battery latch together until the battery pops out of the motherboard socket. 5. Lift the battery to remove it. 6. Insert a new battery with the positive sign (+) facing up. Tilt the battery into the battery connector, angling the battery under the battery latch. Slide the battery until it clicks into place. 7. Replace the left-side access panel. OBTAIN CUSTOMER ACCEPTANCE - WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE: PARTS NOTE: The battery specifications for the Ultra 20 Workstation are: Voltage: 3 VDC Type: CR 2032 REFERENCE INFORMATION: Replacing the System Battery, Section 4.5.6 Sun Ultra 20 Workstation User Guide http://download.oracle.com/docs/cd/E19127-01/ultra20.ws/819-2146-13/index.html Attachments This solution has no attachment |
||||||||||||
|