Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1349595.1
Update Date:2011-11-04
Keywords:

Solution Type  Technical Instruction Sure

Solution  1349595.1 :   How to Remove and Replace a Sun Fire X2270 M2 Power Supply:ATR:1349595.1:0  


Related Items
  • Sun Fire X2270 M2 Server
  •  
Related Categories
  • PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
  •  




In this Document
  Goal
  Solution


Applies to:

Sun Fire X2270 M2 Server - Version: Not Applicable to Not Applicable - Release: N/A to N/A
Information in this document applies to any platform.

Goal

How to remove and replace a Sun Fire X2270 M2 Power Supply

Solution

DISPATCH INSTRUCTIONS
- WHAT SKILLS DOES THE ENGINEER NEED:
- TIME ESTIMATE: 30 minutes
- TASK COMPLEXITY: 0

FIELD ENGINEER INSTRUCTIONS:
- PROBLEM OVERVIEW:  Removing and Installing a Power Supply

- WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE
RESOLUTION ACTIVITY?:
System should be powered off prior to service.

- WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
Remove
1 Prepare the server for service. See How to Prepare for Service.
2 Remove the power supply. See How to Remove the Power Supply.
3 Reference the following illustration for this procedure.
4 Disconnect the three power supply cables from the motherboard.
5 Disconnect the power supply cable from the hard drive backplane and push the cable through the cutout in the chassis divider.
6 Loosen the captive screw that secures the power supply to the chassis.
7 Lift the power supply out of the chassis.

Install
1 Reference the following illustration for this procedure.
2 Insert the power supply into the chassis with the cable bundle toward the front of the server.
3 To secure the power supply to the chassis, fully tighten the captive screw.
4 Route the HD/SSD power cable through the opening in the chassis divider.
5 Connect three of the power supply cables to the motherboard.
6 Connect the power supply cable to the hard disk backplane.
7 Install the power. See How to Install the Power Supply.
8 Prepare the server for operation. See How to Prepare for Operation.


OBTAIN CUSTOMER ACCEPTANCE
- WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO
AN OPERATIONAL STATE:
Power the system on.

PARTS NOTE:

REFERENCE INFORMATION:
Sun Fire X2270 M2 Server Internal Cabling
Locations of Internal Server Components

Sun Fire X2270 M2 Server Service Manual
http://download.oracle.com/docs/cd/E19902-01/821-1345/

Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback