![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||
Solution Type Technical Instruction Sure Solution 1349239.1 : How to Remove and Replace a Sun Fire X2270 M2 PCIe Card:ATR:1349239.1:0
In this Document
Applies to:Sun Fire X2270 M2 Server - Version: Not Applicable to Not Applicable - Release: N/A to N/AInformation in this document applies to any platform. GoalHow to remove and replace Sun Fire X2270 M2 PCIe CardSolutionDISPATCH INSTRUCTIONS- WHAT SKILLS DOES THE ENGINEER NEED: - TIME ESTIMATE: 30 minutes - TASK COMPLEXITY: 0 FIELD ENGINEER INSTRUCTIONS: - PROBLEM OVERVIEW: - WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?: - WHAT ACTION DOES THE ENGINEER NEED TO TAKE: REMOVING 1 Prepare the server for service. See How to Prepare for Service. 2 Remove the air duct. See How to Remove the Air Duct. 3 Disconnect any cables connected to the PCIe card. 4 To unlock the PCIe card, open the locking latch on the server rear panel. 5 To remove the PCIe card from the server, slide the card out of the server rear panel and disconnect the card from the PCIe riser. 6 Remove any card-specific cabling from the server. 7 Install the air duct. See How to Install the Air Duct. 8 Prepare the server for operation. See How to Prepare for Operation. INSTALL 1 Prepare the server for service. See How to Prepare for Service. 2 Remove the air duct. See How to Remove the Air Duct. 3 If necessary, pull open the locking latch on the rear panel of the server to unlock the PCIe filler panel. 4 Remove the filler panel by lifting it straight up and out of the server. 5 If a PCIe riser is not already installed in the server, install a PCIe riser. See How to Install the PCIe Riser. The PCIe riser is a low-profile, half-length x16 connector card. 6 Slide the new PCIe card into the PCIe slot on the rear panel of the server and connect the card to the PCIe riser. 7 To lock the PCIe card, push to close the locking latch on the rear panel of the server. 8 Attach any required internal cabling to the card. 9 Install the air duct. See How to Install the Air Duct. 10 Prepare the server for operation. See How to Prepare for Operation. OBTAIN CUSTOMER ACCEPTANCE - WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE: PARTS NOTE: REFERENCE INFORMATION: Sun Fire X2270 M2 Server Service Manual http://download.oracle.com/docs/cd/E19902-01/821-1345/ Attachments This solution has no attachment |
||||||||||||
|