How to Remove and Replace V440 Power Cord:ATR:772:0

Asset ID:	1-71-1347663.1
Update Date:	2011-11-18
Keywords:

Solution Type Technical Instruction Sure

Solution 1347663.1 : How to Remove and Replace V440 Power Cord:ATR:772:0

Applies to:

Sun Fire V440 Server - Version: Not Applicable to Not Applicable - Release: N/A to N/A
Information in this document applies to any platform.

Goal

How to Remove and Replace V440 Power Cord

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
Nothing beyond basic partner training to be qualified as a Sun Service Delivery Partner.

TIME ESTIMATE: 15 minutes

TASK COMPLEXITY: 0

FIELD ENGINEER INSTRUCTIONS

PROBLEM OVERVIEW:
Power Cord failed.

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer is not required to perform a system shutdown.

The Sun Fire V440 server has dual redundant power supplies each with its own power cord. You can swap one power cord while the other one is still running.

For a single power source configuration, the system should be already powered down.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
Replace the bad power cord.

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

If the replacement was a hot swap on a redundant configuration, the system should be operational and need no further work.

If the replacement was in a system with a single power source, restart software applications per applicable administration guides to resume system operation.

PARTS NOTE:
https://support.oracle.com/handbook_private/Systems/SunFireV440/components.html#Cables

ADDITIONAL COMMENTS:
V440 Parts Installation & Removal Guide and Administration Guide
http://download.oracle.com/docs/cd/E19088-01/v440.srvr/index.html

Attachments

This solution has no attachment