Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1334656.1
Update Date:2012-06-04
Keywords:

Solution Type  Technical Instruction Sure

Solution  1334656.1 :   How to Replace a Sun Netra T5440 Optical (DVD) Media Drive:ATR:1334656.1:0  


Related Items
  • Sun Netra T5440 Server
  •  
Related Categories
  • PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
  •  




Applies to:

Sun Netra T5440 Server - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.

Goal

Replace a Sun Netra T5440 Optical Drive (DVD).

Fix

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
Netra T5440 training recommended but not required as this is a CRU part.

Time Estimate: 30 minutes

Task Complexity: 0

FIELD ENGINEER INSTRUCTIONS


PROBLEM OVERVIEW: Optical Drive failure

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
Shut down system and Power down the server.


To prepare the server optical media drive removal. Proceed with the following steps:

Powering Off the Server
Performing Antistatic Measures

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

Removing optical media drive
1. Open the bezel.
2. Pull the release tab out and to the left, freeing the optical media drive and attached housing.
3. Pull the rear release lever out and to the right, freeing the optical media drive from the housing
4. Set the optical media drive aside on an antistatic mat.

Installing optical media drive

1. Remove the replacement optical media drive from its packaging and place it on an antistatic mat.
2. Seat the optical media drive into the housing and secure it by pressing the rear release lever to the right.
3. Hold the tab to the left and insert the optical media drive into the media bay assembly.
4. Press the optical media drive in until it seats and close the release the tab by pressing it to the right
5. Close the bezel.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Restart the system back on line.

PARTS NOTE:  https://support.oracle.com/handbook_private/Systems/Netra_T5440/components.html#RemovableMedia

REFERENCE INFORMATION:
http://download.oracle.com/docs/cd/E19874-01/820-4445-13/z40004061006939.html#i1001328


Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback