How to Remove and Replace an X6240 Compact Flash:ATR:2276:0

Asset ID:	1-71-1333645.1
Update Date:	2012-08-02
Keywords:

Solution Type Technical Instruction Sure

Solution 1333645.1 : How to Remove and Replace an X6240 Compact Flash:ATR:2276:0

Applies to:

Sun Blade X6240 Server Module - Version Not Applicable and later
Sun Blade 6000 System - Version Not Applicable and later
Sun Blade 6048 System - Version Not Applicable and later
Information in this document applies to any platform.

Goal

How to Remove and Replace an X6240 Compact Flash

Fix

CAP PROBLEM OVERVIEW: Compact Flash Module Replacement.

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)

CRU

TIME ESTIMATE: 30 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

* If necessary, back up any data that is contained on the Compact Flash module.
* Power off the server and remove the server module from the chassis
* Caution – Do not operate the system with empty slots. Always insert a filler panel into an empty slot to reduce the possibility of system shut down.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

* Remove the main cover
* Locate the Compact Flash module underneath the SP board.
You do not need to remove the SP board to remove the Compact Flash module.
* Grasp the module and pull it out from under the SP board.
* Installation is the reverse of this procedure.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS NOTE:

REFERENCE INFORMATION:

Sun Blade X6240 Server Module Service Manual

http://download.oracle.com/docs/cd/E19045-01/blade.x6240/820-3971-11/index.html

Attachments

This solution has no attachment