Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1329307.1
Update Date:2011-10-14
Keywords:

Solution Type  Technical Instruction Sure

Solution  1329307.1 :   Sun Storage 7000 Unified Storage System: How to set up NAS clustering  


Related Items
  • Sun Storage 7410 Unified Storage System
  •  
  • Sun Storage 7310 Unified Storage System
  •  
  • Sun ZFS Storage 7420
  •  
  • Sun ZFS Storage 7320
  •  
Related Categories
  • PLA-Support>Sun Systems>DISK>NAS>SN-DK: 7xxx NAS
  •  
  • .Old GCS Categories>Sun Microsystems>Storage - Disk>Unified Storage
  •  


Unable to configure secondary head into cluster

In this Document
  Goal
  Solution


Created from <SR 3-3807745001>

Applies to:

Sun Storage 7310 Unified Storage System - Version: Not Applicable to Not Applicable - Release: N/A to N/A
Sun Storage 7410 Unified Storage System - Version: Not Applicable to Not Applicable   [Release: N/A to N/A]
Sun ZFS Storage 7420 - Version: Not Applicable to Not Applicable   [Release: N/A to N/A]
Sun ZFS Storage 7320 - Version: Not Applicable to Not Applicable   [Release: N/A to N/A]
Information in this document applies to any platform.

Goal

The purpose of this document is to demonstrate how to configure a secondary head into a cluster

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - 7000 Series ZFS Appliances

Solution

Before you start the configuration, ensure that the cluster card cabling is set up as shown in the Sun ZFS Storage 7000 System Administration Guide.

It is important that no configuration is carried out on the secondary head before attempting to set up cluster on the primary.

The secondary head will either need to be reset to factory defaults or have not been configured at all. It must boot up to the screen that shows:

Press any key to begin initial configuration ...


CAUTION - Do not press any key and do not allow the configuration to proceed any further on this head.

The full procedure to setup the cluster is detailed at:

http://download.oracle.com/docs/cd/E22471_01/html/820-4167/configuration__cluster.html#configuration__cluster__setup_procedure



Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback