Sun Blade 6000 System
 
Sun Blade X6220 Server Module
 
Sun Blade 6048 System
 

PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: x64-CAP VCAP
 

In this Document

Goal

Fix

Applies to:

Goal

How to Remove and Replace Motherboard Battery in an X6220

Fix

CAP PROBLEM OVERVIEW: X6220 Batery Replacement

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
It is recommended(but not required) the following trainning course: WZT-5582: Sun Blade 6000 Modular System Installation, Administration and Troubleshooting.

TIME ESTIMATE: 30 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Power off server and remove server module from chassis

a. Press together and hold green ejector buttons

b. Open ejector levers by rotating them out from server module

c. Pull server module out. Put it on antistatic surface

2. Remove main cover: Press down on the cover release button, slide main cover toward rear of chassis, Grasp cover by rear edge and lift it

Note: Before removing the battery from its holder, note the orientation (polarity) of the battery before it is removed. The positive polarity, marked with a + symbol, should be facing toward the center of the motherboard.

3. Remove battery by gently pulling clip away from battery face and lifting battery straight up ( located near the rear of chassis )

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Work required to bring the system back online

PARTS NOTE:150-3993 [R] BR2032 3V (CF)n/Li Battery, RoHS:ZPanasonic BR2032

REFERENCE INFORMATION:

Sun Blade X6220 Server Module Service Manual
http://download.oracle.com/docs/cd/E19045-01/blade.x6220/820-0046-10/index.html

This solution has no attachment