Asset ID:	1-71-1318114.1
Update Date:	2012-01-25
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1318114.1 :   How to Remove and Replace an X4540 Power Supply:ATR:2041:0  

In this Document
  Goal
  Solution

---

Applies to:

Sun Fire X4540 Server - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

How Remove and Replace a X4540 Power Supply

Solution

CAP PROBLEM OVERVIEW: Replacing a Power Supply

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?) General HW Service Skills

Time Estimate: 30 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD SYSTEM BE TO BE READY TO PERFORM RESOLUTION ACTIVITY? :

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

Remove a Power Supply

If present, remove cable management arm, or swivel open cable management arm to view power supplies.
Disconnect the AC power cord that is connected to power supply you want to replace.
Remove installed power supply unit by pulling its handle downward until it disengages unit from connector on PDB. Pull out power supply.

Install a Power Supply

Align power supply with empty bay in chassis.
With power supply handle in down position, push power supply into power supply bay.
Connect AC power cord to new power supply. Use the power cord retaining clips
If present, swivel cable management arm back into closed position.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS NOTE:


REFERENCE:

Sun Fire X4500/X4540 Server Service Manual

http://download.oracle.com/docs/cd/E19469-01/819-4359-19/index.html

Attachments

This solution has no attachment