How to Remove and Replace X6440 System Battery:ATR:2297:0

Asset ID:	1-71-1317374.1
Update Date:	2012-08-08
Keywords:

Solution Type Technical Instruction Sure

Solution 1317374.1 : How to Remove and Replace X6440 System Battery:ATR:2297:0

Applies to:

Sun Blade X6440 Server Module - Version Not Applicable and later
Sun Blade 6000 System - Version Not Applicable and later
Sun Blade 6048 System - Version Not Applicable and later
Information in this document applies to any platform.

Goal

X6440 System Battery Replacement

Fix

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
X6440 trained

DELIVERY REQUIREMENT:
schedule with maintenance window

TIME ESTIMATE: 30 minutes

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

* The server must be fully shut down and the power cords disconnected.
* Do not operate the system with empty slots. Always insert a filler panel into an empty slot to reduce the possibility of system shut down.
* Take ESD Precautions.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Power off the server and remove the server module from the chassis

2. Remove the main cover

3. If a RAID expansion module (REM) card is installed in the server module, it must be removed before extracting the system battery.

4. Remove the system battery by gently pulling the clip away from the side of the battery and lifting the battery from its holder.

Installation is the reverse of these procedures.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Verify functionality, no service LEDs or messages

PARTS NOTE:

REFERENCE INFORMATION:

https://support.oracle.com/handbook_private/Systems/SunBladeX6440/component.top.html

Maintenance and Operations Documentation
http://download.oracle.com/docs/cd/E19045-01/blade.x6440/index.html

Attachments

This solution has no attachment