Asset ID: |
1-71-1310144.1 |
Update Date: | 2012-10-03 |
Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1310144.1
:
How to Replace a V445 Removable Medi Drive - DVD:ATR:1124:0
Related Categories |
- PLA-Support>Sun Systems>Sun_Other>Sun Collections>SN-OTH: SPARC-CAP VCAP
|
In this Document
Applies to:
Sun Fire V445 Server - Version Not Applicable and later
Information in this document applies to any platform.
Goal
How to remove and replace a Sun Fire V445 DVD
Fix
DISPATCH INSTRUCTIONS
WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
No specific skills required
TIME ESTIMATE: 50 Minutes
TIME COMPLEXITY: 0
FIELD ENGINEER INSTRUCTIONS
PROBLEM OVERVIEW:
Faulty DVD
WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.
Then power down the system and disconnect the Power Cord.
WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
1. Power off the system
2. Remove the front bezel
3. Remove the removable media drive
A. Press the tabs above and below the removable media drive to release it from the chassis.
B. Pull the drive forward and out of the system.
Caution – Do not squeeze the sides of the drive, or pull against its front panel. Doing so could seriously damage the drive.
4.Instal the removable media drive
5.Instal the front bezel
6.Power on the system
OBTAIN CUSTOMER ACCEPTANCE
WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
PARTS NOTE:
REFERENCE INFORMATION:
Sun Fire V445 Server Service Manual.
http://download.oracle.com/docs/cd/E19088-01/
Attachments
This solution has no attachment