![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||
Solution Type Technical Instruction Sure Solution 1307350.1 : How to Remove and Replace a T5140/T5240 System Board Battery:ATR:1328:0
In this Document
Applies to:Sun SPARC Enterprise T5240 Server - Version: Not ApplicableSun SPARC Enterprise T5140 Server - Version: Not Applicable and later [Release: N/A and later] Information in this document applies to any platform. GoalHow to remove and replace a T5140/T5240 System Board BatterySolutionDISPATCH INSTRUCTIONSWHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?) Nothing beyond basic partner training to be qualified as a Sun Service Delivery Partner is required. TIME ESTIMATE: 60 minutes Task Complexity: 0 FIELD ENGINEER INSTRUCTIONS PROBLEM OVERVIEW: System Board Battery Failure WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? : The customer should conduct an orderly software system shutdown. Then power down the system and disconnect the Power Cord. WHAT ACTION DOES THE ENGINEER NEED TO TAKE: 1) Remove a Battery 1. Remove PCIe/XAUI riser 2. 2. Using a No. 1 flat-blade screwdriver, press the latch and remove the battery from the motherboard. 2) Install a Battery 1. Unpack the replacement battery. 2. Pry the clip open slightly and insert the battery into the battery holder. 3. Install PCIe/XAUI riser 2. 4. Use the ILOM setdate command to set the day and time. 5. After returning the server to operation, check and reset the Solaris OS date. OBTAIN CUSTOMER ACCEPTANCE PARTS NOTE: Part location REFERENCE INFORMATION: Sun SPARC Enterprise T5140 and T5240 Servers Service Manual http://download.oracle.com/docs/cd/E19910-01/820-3318-14/820-3318-14.pdf Attachments This solution has no attachment |
||||||||||||
|