How To Remove and Replace V210 Power Supply:ATR:863:0

Asset ID:	1-71-1306114.1
Update Date:	2011-11-11
Keywords:

Solution Type Technical Instruction Sure

Solution 1306114.1 : How To Remove and Replace V210 Power Supply:ATR:863:0

Applies to:

Sun Fire V210 Server - Version: Not Applicable and later [Release: N/A and later ]
Information in this document applies to any platform.

Goal

********************************************************************************
To report errors or request improvements on this procedure,
please go to http://support.us.oracle.com and put a comment on Doc ID: 1306114.1
********************************************************************************

How To Remove and Replace V210 Power Supply

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED: (IS A SITE ENGINEER AVAILABLE?)
Nothing beyond basic partner training to be qualified as a Sun Service Delivery Partner.

Time Estimate: 30 minutes

TASK COMPLEXITY: 0

FIELD ENGINEER INSTRUCTIONS

PROBLEM OVERVIEW: Power Supply Failure

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

System uses a single power supply configuration, the customer should take normal precautions to backup data, notify users of the maintenance and that the system will be powered down. The customer should conduct an orderly software system shutdown.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

Follow standard ESD procedures to avoid Electrostatic Discharge

Remove the power supply:

1.Power off the server

2.Disconnect the power cable.

3.Pull down the lever on the back of the power supply unit.

4.Slide the PSU out of the server's chassis by pulling on the PSU lever

Replace the power supply:

1.Locate the replacement PSU in the PSU bay.

2.Slide the PSU into the server until it attaches (seats) to the power distribution board inside.

3.Press the lever until it clicks.

4.Power the server back on.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN the SYSTEM TO AN OPERATIONAL STATE:

Restart software applications per applicable administration guides to resume system operation.

PARTS NOTE:

REFERENCE INFORMATION: Service Manual and Admin Guide
http://download.oracle.com/docs/cd/E19088-01/

Attachments

This solution has no attachment