![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||
Solution Type Technical Instruction Sure Solution 1272357.1 : Sun Fire V880 - V890 How to Replace a Failed AC Power Cord:ATR:896:0 [Video]
In this Document
Applies to:Sun Fire V880 Server - Version: Not ApplicableSun Fire V890 Server - Version: Not Applicable and later [Release: N/A and later] Sun Fire V880z Visualization Server - Version: Not Applicable and later [Release: N/A and later] Information in this document applies to any platform. Goal******************************************************************************To report errors or request improvements on this procedure, please go to https://support.us.oracle.com and put a comment on Doc ID: 1272357.1 ****************************************************************************** SolutionDISPATCH INSTRUCTIONS- WHAT SKILLS DOES THE ENGINEER NEED: Field training in Sun Fire V880/V890 Server - TIME ESTIMATE: 10 min - TASK COMPLEXITY: 1 FIELD ENGINEER INSTRUCTIONS: - PROBLEM OVERVIEW: Power Cord failed - WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?: A data backup is not a prerequisite but is a wise precaution. The customer is not required to perform a system shutdown. The Sun Fire V880/V890 server has N+1 where N=3 power supplies each with its own power cord. You can swap one power cord while the other two are still running. For a non-redundant power supplies configuration, the system should be already powered down before replace the bad power cord. - WHAT ACTION DOES THE ENGINEER NEED TO TAKE: The Sun Fire V880/V890 server has redundant power supplies each with its own power cord. You can swap one power cord while the other one is still running. For a single power source configuration, the system should be already powered down before replace the bad power cord. OBTAIN CUSTOMER ACCEPTANCE - WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE: If the replacement was a hot swap on a redundant configuration, the system should be operational and need no further work. If the replacement was in a system with a single power source, restart software applications per applicable administration guides to resume system operation. PARTS NOTE: Refer to the V880 System Handbook and V890 Systems Handbook for the country specific type of power cord. REFERENCE INFORMATION: Attachments This solution has no attachment |
||||||||||||
|