How to Replace an AC Power Cord for Sun Fire V1280/E2900 and Netra 1280/1290:ATR:894:0 [Video]

Asset ID:	1-71-1271921.1
Update Date:	2012-02-10
Keywords:

Solution Type Technical Instruction Sure

Solution 1271921.1 : How to Replace an AC Power Cord for Sun Fire V1280/E2900 and Netra 1280/1290:ATR:894:0 [Video]

Applies to:

Sun Fire V1280 Server - Version: Not Applicable and later   [Release: N/A and later ]
Sun Fire E2900 Server - Version: Not Applicable to Not Applicable   [Release: N/A to N/A]
Sun Netra 1280 Server - Version: Not Applicable and later    [Release: N/A and later]
Sun Netra 1290 Server - Version: Not Applicable and later    [Release: N/A and later]
Information in this document applies to any platform.

Goal

Video - Sun Fire V1280/E2900 Netra 1280/1290 Action Plan: Power Supply Replacement (2:05)

Solution

PROBLEM OVERVIEW:
Power cord failed

TIME ESTIMATE: 30 minutes

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY?:

The E2900 has redundant power feeds, therefore, no shutdown is required for a single power cord failure.

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE:
Replace the bad power cord.

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

If the replacement was a hot swap on a redundant configuration, the system should be operational and need no further work.

Restart software applications per applicable administration guides to resume system operation.

REFERENCE INFORMATION:

Refer to the System Handbook for the country specific type of power cord.
Sun Fire V1280/Netra 1280 Systems Service Manual (pdf)
Sun Fire E2900 System Service Manual (pdf)
Netra 1290 Server Service Manual (pdf)

Attachments

This solution has no attachment