Asset ID: |
1-71-1020959.1 |
Update Date: | 2011-07-28 |
Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1020959.1
:
VTL - How to get VTL build number from the VTL Console
Related Items |
- Sun StorageTek VTL Value System
- Sun StorageTek VTL Prime System
- Sun StorageTek VTL Plus Storage Appliance
- Sun StorageTek VTL Storage Appliance
|
Related Categories |
- PLA-Support>Sun Systems>TAPE>Virtual Tape>SN-TP: VTL
- .Old GCS Categories>Sun Microsystems>Storage - Tape>Tape Virtualization
|
PreviouslyPublishedAs
268048
Applies to:
Sun StorageTek VTL Storage Appliance - Version: 4.0 - Build 1221 to 4.0 - Build 1221 - Release: 4.0 to 4.0
Sun StorageTek VTL Value System - Version: 1.0 - Build 1323 to 1.0 - Build 1323 [Release: 1.0 to 1.0]
Sun StorageTek VTL Prime System - Version: 1.0 - Build 1813 to 1.1 - Build 2076 [Release: 1.0 to 1.0]
Sun StorageTek VTL Plus Storage Appliance - Version: 1.0 - Build 1323 to 2.0 - Build 1656 [Release: 1.0 to 2.0]
Information in this document applies to any platform.
.
***Checked for relevance on 19-07-2011*** (dd-mm-yyyy)
Goal
-
To find the version and build of VTL being run by inspecting the GUI.
- Getting the build number of the VTL software from the VTL Console.
Solution
- Open VTL Console (customer's admin will have this installed on a remote workstation, as the GUI is not normally run from the VTL server itself).
- Select (highlight) the VTL server in question from the tree on the left hand side of the screen.
- Userid and password screen will be displayed for customer to enter their information.
- A general or default screen will then be displayed that shows the general information about that VTL server.
- Select the Version Info tab at the top of the right section of the screen.
- The version info will then be displayed on right side of screen.
- Locate the line directly below the "Server Version:" which contains the version and build number.
Example Screenshot of VTL Console:
Attachments
This solution has no attachment