Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1019423.1
Update Date:2012-08-06
Keywords:

Solution Type  Technical Instruction Sure

Solution  1019423.1 :   SL3000 - CAP Label Information  


Related Items
  • Sun StorageTek SL3000 Modular Library System
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
  •  

PreviouslyPublishedAs
239425


Applies to:

Sun StorageTek SL3000 Modular Library System - Version Not Applicable and later
All Platforms
Checked for relevance on 6-Aug-2012.

Goal

Label set is to identify the CAP address on SL3000

Engineering has added the label set to the BDM Installation kit and CAP conversion kits.

Fix

Steps to Follow
These labels are placed on the decorative cover (outside above CAP) over the CAP motor.
(See small rectangular recess on cover)
Note: There are 3 columns of labels.

-First column the labels are blank so the user can create there own labels.
-Second column is for the SCSI address
-Third column is for the HLI address.

Note: On the right side of the label set it notes where and what label to use based on the host they are using and the library configuration.

These labels are not mandatory to install unless the user wants to use them.


Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback