![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||
Solution Type Technical Instruction Sure Solution 1019314.1 : How to connect to the CMM ILOM using a Serial Connection on a Sun Blade 6000/6048
PreviouslyPublishedAs 238412 Applies to:Sun Blade X6240 Server Module - Version Not Applicable to Not Applicable [Release N/A]Sun Blade T6320 Server Module - Version Not Applicable to Not Applicable [Release N/A] Sun Blade X6450 Server Module - Version Not Applicable to Not Applicable [Release N/A] Sun Blade 6048 System - Version Not Applicable to Not Applicable [Release N/A] Sun Blade T6300 Server Module - Version Not Applicable to Not Applicable [Release N/A] All Platforms GoalThis document describes the procedure for accessing the CMM ILOM on the Sun Blade 6000 and 6048 chassis. To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - Sun x86 Systems
Symptoms:
Purpose/Scope:This document gives details on how to login to the CMM ILOM on the Sun Blade 6000/6048 Chassis FixSteps to FollowSteps to connect to the Chassis Monitoring Module (CMM) on a Sun Blade 6000/6048 chassis You can access the CMM ILOM at any time by connecting a terminal or a PC running terminal emulation software to the serial connector on the chassis. 1. Verify that your terminal, laptop, or terminal server is operational. 2. Configure that terminal device or the terminal emulation software to use the following settings: 3. Connect a serial cable from the serial port (SER MGT) on the chassis panel to a terminal device using Sun Part# 530-3813 "DB9F to RJ45F, DCE Adapter" 4. Press Enter on the terminal device. This establishes the connection between the terminal device and the CMM ILOM. 5. Log in to the CLI: a. Type the default user name root b. Type the default password changeme When you have successfully logged in, the CMM ILOM displays the default command prompt: The CMM ILOM is running the CLI. You can now run CLI commands. For additional information on using the CMM connection on the Sun Blade 6000/6048 please refer to the: Oracle Integrated Lights Out Manager (ILOM) CMM Administration Guide for Sun Blade 6000 and 6048 Modular Systems available in the Oracle Integrated Lights Out Manager (ILOM) 3.0 Documentation
Attachments This solution has no attachment |
||||||||||||
|