Asset ID: |
1-71-1018892.1 |
Update Date: | 2012-10-02 |
Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1018892.1
:
Sun Blade[TM] 150 Workstation: How to Connect a Serial Port From the Workstation to an Annex Terminal Server
Related Items |
- Sun Blade 100 Workstation
- Sun Blade 150 Workstation
|
Related Categories |
- PLA-Support>Sun Systems>SAND>Network>SN-SND: Sun Network Serial
|
PreviouslyPublishedAs
230727
Applies to:
Sun Blade 100 Workstation - Version Not Applicable and later
Sun Blade 150 Workstation - Version Not Applicable and later
All Platforms
Goal
Description
This document shows you how to connect a serial port from a Sun Blade[TM] 150 workstation to an Annex terminal server.
Fix
Steps to Follow
The serial port connector of a Sun[TM] Blade 150 workstation is a DB9 male.
The port type of an Annex is RJ45. Therefore, a standard UTP network cable and an RJ45F to a DB9F converter would be needed to connect them. However, the Sun[TM] RJ45 to DB9 connector does not work (P/N: 530-3100-01):
https://support.us.oracle.com/handbook_internal/Devices/Cables/530-3100.html
As a result, a custom cable must be made as follows:
DB9 pin | Color codes | RJ54 pin |
2 (rxd) |
<---black---> |
3 (txd) |
3 (txd) |
<---green---> |
5 (rxd) |
5 (gnd) |
<---yello---> |
6 (gnd) |
The color codes are the colors found in a DB9 to a RJ45 converter that can be purchased on the market. (Refer to the preceding URL) It is, of course, most important to get the pin-out right; colors are there to assist. In these converters and adapters the wires must be manually connected in the DB9 connector to make the required connections.
The colors should not be confused with the colors used in the CAT 5 cables.
The connection between the RJ45 on the Annex and on the manually made connector must be made with a normal "straight through" Ethernet cable.
Note: To connect the DB9 to a RJ45 connector to a Sun[TM] Blade 100/150 chassis, use the DB9 extender supplied with the system (part number: 370-5267).
For a reference, refer to the URL for the DB9 and RJ45 serial pin-out at
https://support.us.oracle.com/handbook_internal/General/std_if_conn.html#SER
Product
Sun Blade 100 Workstation
Sun Blade 150 Workstation
Internal Comments
Audited/updated 12/03/09 [email protected], Entry Level SPARC Content Team Member
Currency check, Process comments and publish, 10/19/10, Dencho Kojucharov, Entry Level SPARC Content Team
sun, blade, sun blade, 150, terminal, console, server, 100, annex
Previously Published As
76669
Change History
Date: 2009-12-10
User Name: Volkmar Grote 117021
Action: Updated, fixed links and fonts
Comment: Links to sunsolve.central are slightly useless for contract customers ...
Date: 2004-06-18
User Name: c8840
Action: Approved
Comment: I edited this document and then I submitted it for publication.
Version: 0
Date: 2004-06-17
User Name: c8840
Action: Created
Comment:
Version: 0
Attachments
This solution has no attachment