Sun Storage 351x Arrays: Setting Battery Date After Replacement

Asset ID:	1-71-1017748.1
Update Date:	2012-07-31
Keywords:

Solution Type Technical Instruction Sure

Solution 1017748.1 : Sun Storage 351x Arrays: Setting Battery Date After Replacement

Applies to:

Sun Storage 3310 Array - Version Not Applicable and later
Sun Storage 3320 SCSI Array - Version Not Applicable and later
Sun Storage 3510 FC Array - Version Not Applicable and later
Sun Storage 3511 SATA Array - Version Not Applicable and later
All Platforms
The following command returns an error :
sccli > show battery-status

sccli: Upper Battery: error: in service date not set in the battery
sccli: Lower Battery: error: in service date not set in the battery

Goal

This document will explain how to set the Battery in-service date.

Fix

Steps To Follow

Run the command :

sccli> show battery-status -u

The show battery-status -u command sets the in-service date to the battery board
manufacturing date and prompts the user to verify the date.
The user has an option to answer "y" or "n".
On answering "y" , the user can verify if the correct expiration date has been
set with the command :

sccli> show battery-status

Upper Battery Type: 1

Upper Battery Manufacturing Date: Wed Mar 16 23:00:00 2005

Upper Battery Placed In Service:  Sat Oct 15 11:39:03 2005

Upper Battery Expiration Date:    Mon Oct 15 11:39:03 2007

Upper Battery Status: OK

Lower Battery Type: 1

Lower Battery Manufacturing Date: Wed Mar 23 23:00:00 2005

Lower Battery Placed In Service:  Sat Oct 15 10:55:03 2005

Lower Battery Expiration Date:    Mon Oct 15 10:55:03 2007

Lower Battery Status: OK

Change History
Date: 2010-11-30
User Name: [email protected]
Action: Currency & Update
Date: 2005-10-24

Attachments

This solution has no attachment