![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||
Solution Type Technical Instruction Sure Solution 1017395.1 : VTL - Does VTL support ACSLS Volume Access Control
PreviouslyPublishedAs 228476
Applies to:Sun StorageTek VTL Value System - Version: 1.0 - Build 1323 to 1.0 - Build 1323 - Release: 1.0 to 1.0Sun StorageTek VTL Prime System - Version: 1.0 - Build 1813 to 1.1 - Build 2076 [Release: 1.0 to 1.0] Sun StorageTek VTL Plus Storage Appliance - Version: 1.0 - Build 1323 to 2.0 - Build 1656 [Release: 1.0 to 2.0] All Platforms . ***Checked for relevance on 14-07-2011*** (dd-mm-yyyy) GoalThis document is intended to provide information on connecting ACSLS to a Oracle VTL serverSolutionVTL does work with ACSLS Volume Access Control. 1. The VTL IP and an "access id" must be entered into the internet.addresses file. - If VTL is in an HA configuration, use the heartbeat IP. 2. Use the "set owner" command to set Volume ownership using the "access id" defined above. Also refer to the ACSLS Installation, Configuration and Administration Guide (ICAG) for detailed instructions on configuring a client host for Volume Access Control Attachments This solution has no attachment |
||||||||||||
|