Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1015824.1
Update Date:2012-05-02
Keywords:

Solution Type  Technical Instruction Sure

Solution  1015824.1 :   T10000 - LED Encryption Status Information  


Related Items
  • Sun StorageTek T10000A Tape Drive
  •  
  • Sun StorageTek T10000B Tape Drive
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK T-Series Drive
  •  

PreviouslyPublishedAs
224624


Applies to:

Sun StorageTek T10000B Tape Drive - Version Not Applicable and later
Sun StorageTek T10000A Tape Drive - Version Not Applicable and later
All Platforms
Checked for relevance on 10/Jan-2011.


Goal

T10000 - LED Encryption Status Information.

Fix

Steps to Follow
Description of LEDs for Encryption:

 

Refer to the T10000 Tape Drive Operator's Guide for complete details of informaion provided here.

http://docs.oracle.com/cd/E26105_02/en/E20714/E20714_02.pdf

The T10000 drives that are encryption capable have a multi-color encryption status LED on the rear panel of the drive.

If the encryption status LED is green, it indicates that the drive functions in a non-encryption "Safe" mode and can neither read nor write encrypted tape cartridges.  However, the drive can function normally for non-encryption tasks.

After the drive is encryption enabled, the LED turns red to indicate that the drive is "Armed" and functional on the encryption mode.  In this state, the drive can read and write encrypted tape cartridges.  The drive can also read non-encrypted tape cartridges, but cannot write to non-encrypted tape cartridges.

The states of encryption status LED are:

LED state: Off

   The drive does not have encryption hardware.

LED state: Green

   Encryption capable, but not enabled.

   KMS 1.X: Not encryption

   KMS 2.X: Not licensed

   Normal-unencrypted drive write/read cartridge operations.

LED state: Gren (slow flashing)

   Mode: Reset

   Encryption previously enabled, but requires keys.  Drive is capable of read-only, unencrypted cartridge operations.

        Note : Drive is no longer capable of unencrypted write operation after encryption has been enabled.

LED state: Red

   Mode: Armed, idle

   Encryption enabled/active.  Ready to encrypt.

LED state: Red (slow flashing)

   Mode: Armed, active

   Encryption read/write cartridge operation in progress.

LED state: Amber

   KMS 1.X: Requires media key.

   KMS 2.X:

     - Enrolled, cartridge not loaded.

    - Enrolled, cartridge loaded but waiting for KMS key.

LED state: Amber (slow flashing)

   Requires device key (KMS 1.x only).

LED state: Cycling

       Note - The LED continously cycles through several colors at the slow flash rate.

   Mode: Zeroed

   Media, device and enabling keys missing.  The drive is unusable, and must be returned to manufacturing.



Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback