L700/L180 - How to reset library statistics in Library Admin

Asset ID:	1-71-1015815.1
Update Date:	2012-07-26
Keywords:

Solution Type Technical Instruction Sure

Solution 1015815.1 : L700/L180 - How to reset library statistics in Library Admin

Related Items


Sun StorageTek L180 Tape Library
 Sun StorageTek L1400 Tape Library
 Sun StorageTek L700 Tape Library

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK Legacy Drive and Library

PreviouslyPublishedAs
224610

Applies to:

Sun StorageTek L180 Tape Library - Version Not Applicable and later
Sun StorageTek L700 Tape Library - Version Not Applicable and later
Sun StorageTek L1400 Tape Library - Version Not Applicable and later
All Platforms
Checked for relevance on 26-July-2012.

Goal

This article addresses how to reset library statistics in Library Admin.

Fix

Steps to Follow
To reset Library Statistics in Web Library Admin, you can go into the CLI port and do a "stat clear" command.

CLI>stat clear

This command is not available by the customer and must be done by a service representative.

Attachments

This solution has no attachment