Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1015604.1
Update Date:2012-07-30
Keywords:

Solution Type  Technical Instruction Sure

Solution  1015604.1 :   L700 - How To Set Hard Addressing in Library  


Related Items
  • Sun StorageTek L700e Tape Library
  •  
  • Sun StorageTek L700 Tape Library
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK Legacy Drive and Library
  •  

PreviouslyPublishedAs
224083


Applies to:

Sun StorageTek L700 Tape Library - Version Not Applicable and later
Sun StorageTek L700e Tape Library - Version Not Applicable and later
All Platforms
Checked for relevance on 25-July-2012.

Goal

How To Set Hard Addressing in L700e library.

Fix

This document describes L700 - How To Set Hard Addressing.
See page 3-12 of the L700E Operator's Guide.

Steps to Follow
How To Set Hard Addressing:
1. On L700e's operator panel, hit menu to access the main menu.
2. Path from main menu = Configuration -> Choose Drive -> Drive config, hit select.
3. Toggle Hard Addressing to ENABLED. Hard address will be set to 0.
4. Repeat for each drive that needs to use hard addressing.

NOTE:
This is also good for the L180 and L1400 library.


Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback