L700/180 - How to Identify what Type of SCSI Interface is Being Used

Asset ID:	1-71-1013880.1
Update Date:	2012-07-25
Keywords:

Solution Type Technical Instruction Sure

Solution 1013880.1 : L700/180 - How to Identify what Type of SCSI Interface is Being Used

Applies to:

Sun StorageTek L700 Tape Library - Version Not Applicable and later
Sun StorageTek L180 Tape Library - Version Not Applicable and later
All Platforms
Checked for relevance on 25-July-2012.

Goal

How to Identify what Type of SCSI Interface is Being Used in the library.

Fix

Procedure can be found in the "L700e Tape Library and L700-Pass-Thru Port Operator's Guide".

Steps to Follow
How to Identify what Type of SCSI Interface is Being Used:

Power the library on if it isn't already. Wait for it to finish initializing.
Press the "Menu" button and arrow down until you see "Lib Info Config".
Press the "Select" button to select "Lib Info Config" and arrow down until you see "Lib SCSI I/F".
Select "Lib SCSI I/F" and there you should see what SCSI interface is installed on the library. It will either be HVD or LVD.

Attachments

This solution has no attachment