Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1013751.1
Update Date:2012-07-30
Keywords:

Solution Type  Technical Instruction Sure

Solution  1013751.1 :   L180/700 - How to Determine the Remaining Number of Cleans Left on a Cleaning Tape in an L-Series Library  


Related Items
  • Sun StorageTek L180 Tape Library
  •  
  • Sun StorageTek L700 Tape Library
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK Legacy Drive and Library
  •  

PreviouslyPublishedAs
219571


Applies to:

Sun StorageTek L700 Tape Library - Version Not Applicable and later
Sun StorageTek L180 Tape Library - Version Not Applicable and later
All Platforms
Checked for relevance on 25-July-2012.

Goal

This document describes how to determine the remaining number of cleans left on a cleaning tape in an L-Series Library.

Fix

Steps to Follow
Use the following steps to determine number of cleans available:

  1. Go to the LCD display of the library and go to the Diagnostics selection.
  2. Select "Cleaning Tapes".

    > The number displayed is the amount of cleanings left on each tape.

NOTE:
The Install Manual is not available to the customer.

For additional information, refer to the L700/L180 Tape Library Installation Manual, Chapter 5 "Configuring the Subsystem", Display Information.





Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback