![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||
Solution Type Technical Instruction Sure Solution 1013276.1 : 9x40/T10000 - Where to get the UIM for Oracle/StorageTek[TM] Tape Transports
PreviouslyPublishedAs 218438 Applies to:Sun StorageTek 9840B Tape Drive - Version Not Applicable and laterSun StorageTek 9840 Tape Drive - Version Not Applicable and later Sun StorageTek 9940 Tape Drive - Version Not Applicable and later Sun StorageTek 9940B Tape Drive - Version Not Applicable and later Sun StorageTek T10000A Tape Drive - Version Not Applicable and later All Platforms Checked for relevance on 27-July-2012. GoalThis article describes where to locate the UIM for Sun StorageTek[TM] tape drives and how to obtain the UIM for Sun StorageTek transports. It also addresses the following questions: FixSteps to Follow: This version of the usermod is for OS/390 V2.10 to z/OS V1.2. TYT10K1.usermod This version of the usermod is for z/OS V1.3 to z/OS V1.10 without IBM APAR OA24964 installed. TYT10K2.usermod This version of the usermod is for z/OS V1.8 and above with IBM APAR OA24964 installed. Due to a change IBM made with APAR OA24964, the old UIM had to be rewritten. The above-listed UIMs have been updated to support all the current Sun StorageTek tape drive types: 9490, T9840x, T9940x, T10000x. These new UIMs were released in March 2009. Attachments This solution has no attachment |
||||||||||||
|