Asset ID:	1-71-1012645.1
Update Date:	2012-02-06
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1012645.1 :   Sun Fire T1000 and T2000 Servers: How do I access the ALOM CMT from Solaris Operating System?  


PreviouslyPublishedAs
217394

Description
Currently on Sun Fire T1000 and T2000 servers there is no Solaris Operating System bundled command line interface utility for retrieving information from the Advanced Lights Out Management (ALOM) Chip Multi-Threading technology (CMT), such as environmental, fault and configuration data.

This document describes how to use Oracle Explorer retrieve this information as an alternative to connecting directly to the ALOM CMT via the Serial or Network management port.

Steps to Follow
Previous Sun systems utilising ALOM system controller, such as the SunFire V210, V240, V250 and V440, used the 'scadm' utility to communicate with the system controller (SC).

There is currently no command in Solaris Operating System (OS) to do the same with the ALOM CMT SC on the Sun Fire T1000 and T2000 servers.

Oracle Explorer is a system configuration information gathering tool, refer to doc 1312847 for download and installation instructions.

Explorer 5.4 (and later) comes with a Tx000 module which can gather ALOM CMT command output from the Solaris OS command-line.  To gather the ALOM CMT environmental, fault and configuration data using explorer, run as the root user:

/opt/SUNWexplo/bin/explorer -w Tx000

This runs the Sun Fire T1000/T2000 specific module of Oracle Explorer, and provides output in the Tx000 directory:

/opt/SUNWexplo/output/<explorer name>/Tx000

It is always recommended to use Explorer 5.5 and later, as the Tx000 module (script) will be run automatically. By default, output from the following ALOM CMT commands is gathered:

showdate
showsc
showsc version -v
showenvironment
showfaults -v
showfru
showplatform -v
shownetwork
showusers
showlogs -v
showkeyswitchshowcomponent
showho consolehistory -v

Product
Sun Fire T2000 Server
Sun Fire T1000 Server
Sun SPARC Enterprise T1000 Server
Sun SPARC Enterprise T2000 Server

Internal Comments
The Sun Explorer Tx000 module:

/opt/SUNWexplo/tools/Tx000

calls the snapshotutility also located in the Sun Explorer directory structure:

/opt/SUNWexplo/bin/snapshot

to perform the actual communication with the ALOM CMT
The list of commands to execute on the ALOM CMT are entered into the snapshot.conf file:

/opt/SUNWexplo/lib/snapshot.conf

And although unsupported outside of Sun Explorer, the snapshotutility can be run by root, directly from the command line.
The following example:

/opt/SUNWexplo/bin/snapshot -c /opt/SUNWexplo/lib/snapshot.conf -o /tmp/ALOM

would result in the ALOM CMT commands listed in the snapshot.conf file being executed
with output being placed in the directory /tmp/ALOM

The directory will be created if it does not already exist

NOTE: RFE CR 6367394 scadm command on Solaris to access ALOM
has been submitted to request this functionality on the T1000/T2000 servers.

T1000, T2000, ALOM CMT, environmentals, showenvironment, showfaults, showsc
Previously Published As
86283

Change History
Date: 2010-06-16
User Name: [email protected].
Action: Currency checked by [email protected]
Comment:Good to go

Attachments

This solution has no attachment